“Help Us” to get most relevant tenders
Popular Keyword
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Corrigendum Special Repair T, Ganganagar - Tender Details
Explore tender information for Corrigendum Special Repair T in Ganganagar, including eligibility, deadlines, and bid specifics.
Military Engineer Services
Ganganagar, Rajasthan, India
NTID 39052086
Opening Date : Thu 6th March, 2025- Closing Date : Wed 5th March, 2025
- ₹ 0.00
- NTID 39052086
Corrigendum : Special Repair To Ber Dg Transformer And Miscellaneous Connected Work At Sriganganagar Mil Stn
Key Values: Document Cost: 500.00 | EMD: 50700.00 | Estimated Cost: 0.00
Documents
Get Complete Tender Details Now – Download the Document!
Buy This Document-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50700.00 -
Document Cost
500.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 36 | Total Qty : 3411.4
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Taking up old unserviceable DG set by dismatling it from the Foundation, taking out/dismantling the electrical connection, Fuel connection from fuel tank, exhaust pipe and deposited it to MES Yard complete all as specified and directed by Engineer-in- Charge. | 1.00 | Each Job |
| 2 | Taking down old unservieable LT cable of any size and capacity complete all as specified and directed by Engineer-in-Charge. | 40.00 | RM |
| 3 | Supply, installation, testing and commissioning in replacement of "Silent type" (accoustic enclosure type as per NBC 2016), as per CPCB- IV or latest CPCB norm, Diesel Engine driven Generating set of capacity not less than 75 KVA, 415 Volts 3 phase 4 wire 0.8 power factor and 1500 RPM at NTP electrical start, directly coupled and mounted on common base frame with coupling of suitable size to water cooled turbo charged diesel engine of suitable BHP as per IS: BS5514 / ISO 3046 and alternator as per IS-13364 complete with foundation, AVM pads, control panel fuel tank of suitable capacity with fuel lines of heavy duty MS pipe duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and suitable batteries of capacity as recommended by manufacturer fixed on angle iron frame with necessary meters and sound proof canopy and separate battery charging system of suitable capacity with all standard accessories, tool box and tools as provided by the manufacturer complete all as specified and directed. | 1.00 | Each Job |
| 4 | (A) Prime Mover: Vertical diesel engine of suitable capacity water cooled,Radiator mounted close circuit as per BS 649 or IS 1002 direct injection type turbo charged. The DG set shall be capable of running 24 hours on full load. Engine shall be equipped with all standard fittings as per manufacturer's recommendation and mounted on common base frame with following:- (i) RPM cum Hour meter (ii) Battery charging alternator with inbuilt regulator (iii) Ignition and starting keys with push button switch (iv) Lubricating oil pressure gauge, oil and water temperature gauges (v) Batteries as recommended by manufacturer with battery leads of suitable size of copper cable (vi) Self starter motor of suitable capacity (vii) PCC Foundation for Generating set as per recommendation of manufacturer (viii) Exhaust pipe duly insulated with asbestos rope for thermal insulation (ix) Exhaust silencer industrial type to maintain noise level (x) Over speed indication (xi) Low lubrication, oil trip indication (xii) Engine Hours indication (xiii) Digital Amp meter and Voltmeter | ||
| 5 | (B) Alternator:- Synchronous alternator of rating not less than 75 KVA DG set, 3 phase, 50 cycle, 415 volts, 4 wire AC supply 0.8 PF at NTP for running at 1500 RPM self excited, self regulated, screen protected, brushless type mounted on common base frame coupled with above Engine. The alternator shall be conforming to IS 60034-1 / BS 2613 suitable for tropical conditions and with class F/H insulation Note:-DG losses, monitoring as per ECBC 2017 Standard and must be BEE 3 star rated minimum (C) Contol Panel and AMF Panel :- Control panel and AMF panel, 415 Volts, 3 phase, 4 wire, 50 cycles fabricated out of 2mm thick MS sheet and powder coated painted internally and externally complete with copper bus bars with suitable capacity with incoming / outgoing terminals control wiring with copper cable of suitable size for DG set including all engine and alternator control switches and indicator as per manufacturer design and comprising of the following:- (i) MCCBs of 160 Amps capacity, 415 Volts, 4 pole, 16 KA for incoming/outgoing with over load and short circuit protections - 03 Nos (ii) Voltmeter and Ammeter with selector switches and CTs of suitable capacity (iii) Power factor and frequency, RPM, running hours counter, water tempreture, lub oil pressure meters (iv) Indicating lamps (LED type) to indicate RYB and for load on and set running battery charger ON. |
You Are Free Trail User
PAY PER TENDERPurchase Access To Download Selected Documents
₹ 200
Select this Plan
SUBSCRIBE PLAN 
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054