- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Military Engineer Services
- >
NTID 42667869
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Installation Of in Nagrota - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Installation Of " in Nagrota, India.
Military Engineer Services
Nagrota, Himachal Pradesh, India
NTID 42667869
- Opening Date : Wed 10th December, 2025
- Closing Date : Mon 8th December, 2025
- ₹ 4453000.00
- NTID 42667869
Key Values: Document Cost: 500.00 | EMD: 89060.00 | Estimated Cost: 4453000.00
Tender Description
Corrigendum : Installation Of 250 Kva Transformer Under Age (i) Bhalra
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
89060.00 -
Document Cost
500.00 -
Estimated Cost
4453000.00
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum |
BOQ Items Total Items : 47 | Total Qty : 2856.5
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply, installation testing and commissioning outdoor distribution type step down transformer 11000/433 volts (at no load), AC 4 wire, 3 phase 50 HZ of capacity 250 KVA, core type double copper wound, oil immersed, naturally cooled, oil natural, Air natural (ONAN) with external cooling fans, delta connected on primary side (HV) and star connected on secondary side (LV) in accordance with vector symbol, DYN 11 (Vector Group) with neutral brought out on secondary side (LV) and having tapping at 2.5% to 7.5% HV side to be changed by means of hand operated off load tap change gear. The maximum temperature rise should nor exceeds 45 degree celsius in oil and 55 degree Celsius in HV/LV winding when measured by resistance method after continuous full load run on an ambient temp of 40 degree Celsius. The transformer shall be IS: 1180-2014 Part-I (Level II) marked and shall comprises of the following :- | 1.00 | Each |
| 2 | (a) 3 Nos porcelain bushing with arcing horn on HV side suitable for 11 KV complete with bushing, copper rods nuts and washers. (b) One cable box on LT side (Secondary side) consisting of four nos porcelain bushing with copper rods, complete with nuts and washers, with 02 nos cable gland suitable for reception/taking out XLPE insulated heavy duty armoured cable including gland, joint and joining materials completed. (c) Oil conservator with filter type drain valve and oil level gauge. (d) De-hydrating with first fill dehydrating agent(Silica gel). (e) Explosive vent. (f) Thermometer pocket on tank cover. (g) One Nos 100 mm dia, dial type thermometer, vapors pressure type, having range 0-120 degree Celsius with metal guard having maximum perimeter reading temperature indicator with resisting device transformer. (h) Two earthing terminals on tank cover to facilitate fixing of 32 x 6 mm galvanized in earth strip for earthing of neutral & body. (j) Rating plate and terminal making plate. (k) Oil level gauge. (l) Oil drain / filter valve (m) Lifting lugs. (n) Oil filling hole with cap/plug with connecting plate connecting plate completed. (o) Air release valve plug. (p) Four plain solid cast steel detachable rollers. (q) Extra bushing for neutral, outside the LT cable box for providing independent earthing for neutral. (r) First filling of new and unused transformer oil conforming to IS-35/93 (Fourth revision) marked filtered and tested up to 60 KV dielectric strength at 2.5 mm air gap between testing. Note : Certificate of dielectric strength shall be submitted by the contractor after filling the oil | ||
| 3 | M&L Steel Tubular swaged poles type 410 SP-55 (11.0 mtr long) conforming to IS : 2713 Part-I to III 1980, complete with 6 mm thick mild steel base plate, finial taper plug, MS bolts, nuts, screws including painting upto 1.5 metre above PCC coping in black and white strips 05 Nos of 30cms each starting from the bottom of the pole and two coats epoxy based paint aluminium grade finish to the remaining external surface over one coat of primer complete all as specified and as directed. | 2.00 | Each |
| 4 | M&L Steel Tubular swaged poles type 410 SP-31 (9.0 mtr long) conforming to IS : 2713 Part-I to III 1980, complete with 6 mm thick mild steel base plate, finial taper plug, MS bolts, nuts, screws including painting upto 1.5 metre above PCC coping in black and white strips 05 Nos of 30cms each starting from the bottom of the pole and two coats epoxy based paint aluminium grade finish to the remaining external surface over one coat of primer complete ill as specified and as directed. | 75.00 | Each |
| 5 | Supply & fixing street light fitting of minimum 60 Watt LED made up of pressure die cast aluminum housing with high power LED as lighting source and lens embedded PCC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 with 10KV built-in surge protection device all as specified and as directed. | 75.00 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054