- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 43052814
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry NowBalance Work Additional Accomm in Nagrota - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Balance Work Additional Accomm" in Nagrota, India.
Public Works Department
Nagrota, Himachal Pradesh, India
NTID 43052814
- Opening Date : Thu 11th December, 2025
- Closing Date : Thu 11th December, 2025
- ₹ 2590222.00
- NTID 43052814
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
51850.00 -
Document Cost
2000.00 -
Estimated Cost
2590222.00
BOQ Items Total Items : 30 | Total Qty : 10835.02
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing and fixing 6mm (Six millimetre) thick ply wood lining of Uniply/Green ply ISI marked with butt jointing (frame work and cover fillets to be measured and paid for separately) complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 36.00 | Per square metre |
| 2 | Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board of Uni ply /Green ply ISI marked IS No. 1659 for shutter. All cut portions of the board shall have 6/12mm (Six/Twelve millimetre) thick hard wood edging and outer side of the shutter to be finished with 1mm (One millimetre) thick lamination ISI marked IS No. 12823 of Kit Vista of Kit ply and approved shade with butt joints and fixing nails and screws etcetera upto all floor level complete including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. (Lamination and hard wood edging to be measured and paid for separately). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 80.00 | Per square metre |
| 3 | Providing and fixing 19mm (Nineteen milimetre) thick water proof commercial board in shelves/box of cup board ISI marked IS No. 1659 of ply for cup board and all cut portions of the board shall have 6mm (Six millimetre) thick hard wood edging and back side of cup board shall have 6mm (Six millimetre) thick plywood lining with butt joints & fixing with nails & screws etcetera complete including entire carriage of material within all leads, lifts and other incidentals, as per approved drawing, design, specifications and as directed by the Engineer-in-Charge. (Hard wood edging to be measured and paid for separately). The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 80.00 | Per square metre |
| 4 | Finishing wall with apex weather proof exterior grade emulsion of Asian paints/Nerolac suraksha on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etcetera including sand paper smooth and carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 1798.14 | Per square metre |
| 5 | Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government. | 80.00 | Per cubic metre |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054