Cube Moulds

Cube Moulds are made to test a variety of properties on the eventually cured and hardened concrete. Fresh concrete is subjected to a standard compaction regime in the cube moulds and is then normally initially cured under specific laboratory conditions. The moulds are manufactured, subject to tight dimensional, hardness, squareness and surface finish requirements. Specifications: Complete with base plate. The faces of the moulds are machined flat to /- 0.02mm accuracy and finished to within /- 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel. The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage. The moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth. The base plate is attached to the moulds by cleats .The parts of the moulds, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable. Additional Information: Item Code: EIE-051 Pay Mode Terms: L/C (Letter of Credit),D/A,T/T (Bank Transfer) Port of Dispatch: Ahmedabad Airport Production Capacity: 3000 per annum Delivery Time: 1 week after receipt of firm order Packaging Details: Pallet packing