ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply Of Pet Preforms For 500 in Thiruvananthapuram - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply Of Pet Preforms For 500" in Thiruvananthapuram, India.
KERALA IRRIGATION INFRASTRUCTURE DEVELOPMENT CORPORATION LIMITED
Thiruvananthapuram, Kerala, India
NTID 46574327
- Opening Date : Wed 16th September, 2026
- Closing Date : Mon 14th September, 2026
- ₹ 8000000.00
- NTID 46574327
Key Values: Document Cost: 2950.00 | EMD: 50000.00 | Estimated Cost: 8000000.00
Tender Description
Supply Of Pet Preforms For 500ml Packaged Drinking Water Bottle For Our Plant At Aruvikkara Thiruvananthapuram District And For Thodupuzha Idukki District (kerala)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
2950.00 -
Estimated Cost
8000000.00
BOQ Items Total Items : 3 | Total Qty : 1100000
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Appendix A | ||
| 2 | Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Aruvikkara(Thiruvananthapuram) and shall be inclusive of all unloading charges at site | 500000 | Each |
| 3 | Supply of 28mm neck size PET Preforms as per the following Techincal Specifications: Weight: 12.5 gms ± 0.50 gms, Raw Material: Polyethylene Terepthalate resin with IV 0.80 +/- 0.02. Only virgin raw material shall be used. Proof for the quality shall be produced , if asked for. Material (PET- Resin) should be as per BIS standards; 12252 : 1987, 12229 : 1987 as suitable for packing mineral water / food stuff. Overall migration should be as per IS - 14543 : 2004. , deviation can be accepted. Neck: 28 mm, Three start / half twist thread Color of preform : Clear , Length: 85 mm ± 2 mm, max. deviation can be accepted. However, performs with minus grammage deviation in 1000nos shall be limited to 5% Foreign/Black Particles: Preforms should be fully free from any Foreign or Black particles. Flashes are not acceptable. Fused Preforms: Preforms should not be stuck together. Crystallinity: Crystallinity in the end of the Preform shall not exceed more than 10 mm from the gate. Bubbles are not acceptable. Scratches: Scratches should not be visible to the naked eye Acetaldehyde Content: < 3 ppm. The product should be in line or superior in quality comparing with the leading soft drink and mineral water manufacturers. It is desirable to have plastic bottles made of polyethylene terephthalate resin containing only a very low level of aldehyde or of any other material that may give a taste to a drink bottled therein. Cost shall be inclusive of all conveyance and delivery at the factory at Thodupuzha(Idukki) and shall be inclusive of all unloading charges at site | 600000 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054