- Home
- >
- Tender
- >
- Meghalaya Tender
- >
- Department of Food Corporation Of India
- >
NTID 43117168
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply Installation Testing An in Baghmara - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply Installation Testing An" in Baghmara, India.
- Opening Date : Tue 23rd December, 2025
- Closing Date : Mon 22nd December, 2025
- ₹ 766910.00
- NTID 43117168
Key Values: Document Cost: 0.00 | EMD: 15340.00 | Estimated Cost: 766910.00
Tender Description
Supply Installation Testing And Commissioning Of 1 No. Of 16 Mtr High Mast Including Service Connection At Fsd Baghmara Under Ro Nef.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
15340.00 -
Document Cost
Refer Documents -
Estimated Cost
766910.00
BOQ Items Total Items : 17 | Total Qty : 157
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply,Installation,Testing and Commissiong of 16 meter height raising/lowering type hot dipped galvanized High Mast shaft in two section with top dia and thickness 150 mm, 3mm respectively and bottom dia 450mm, 4mm,PCD 590 mm with the base plate of 670 mm X 525 mm respectively suitable for wind velocity as 50 m/sec, alongwith Head frame sliding galvanized lantern carriage capable of moving up and down the mast complete with self aligning mechanism guides and capable of receiving 8 Luminaire, raising lowering system comprising double drum winch, 6mm diameter SS wire rope (7/19 construction), ERP insulated 5 CoreX2.5 Sqmm PVC Sheathed Trailing cable, Connectors as required, Integral power tool three phase 1 HP motor, manual handle, junction box, Heavy gauge hot dip galvanized lighting finial for protection of High Mast, lightning finial/spike with 1Cx35 sq. mm Copper armoured flexible cable shall be used as a down conductor from lightning finial to the bottom of High Mast. | 1.00 | Set |
| 2 | Supply, Installation, Testing and Commissioning of outdoor stand mounted feeder pillar with 32 Amp. TPN MCB incomer, single dial timer, TP contactor for the automatic switching of luminaries, power tool control with 2 nos. 9 A contactors and raise lower push button, with max. incoming cable size of 35 Sq.mm and outgoing cable size of 16 & 2.50 Sq.mm terminals, etc. or as per directions of Engineer-in-Charge. Panel should be erected in min. 14 gauge CRCA sheet Box with supporting angels 7 Tank chemical treatment powder coated for long lasting finish, self-lock, gasket and slanting top erected in CC foundation in an approved manner. | 1.00 | Set |
| 3 | Providing of LED type twin dome aviation obstruction lights . | 1.00 | Each |
| 4 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy 105<120 lm/Watt). Supplying, installation, Testing & Commissioning of Flood light, powder coated pressure die cast alluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 C to 50 C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F. 0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000 K / 4000 K / 5700 K /6500 K (As per ANSI Bin),SDCM (Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy 105 <120 lm/Watt output. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 C). | ||
| 5 | 200 watt | 8.00 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054