- Home
- >
- Tender
- >
- Haryana Tender
- >
- Department of Gurugram University
- >
NTID 45203228
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply Installation Testing in Gurgaon - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply Installation Testing " in Gurgaon, India.
- Opening Date : Mon 25th May, 2026
- Closing Date : Mon 25th May, 2026
- ₹ 7887497.00
- NTID 45203228
Key Values: Document Cost: 5000.00 | EMD: 157749.00 | Estimated Cost: 7887497.00
Tender Description
Supply, Installation, Testing and Commissioning Of Boom Barriers, Road Safety Products (spring Post, Corner Guard, Convex Mirror) And Road Wheel Barriers Etc. At Gug Sec-87
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
157749.00 -
Document Cost
5000.00 -
Estimated Cost
7887497.00
BOQ Items Total Items : 18 | Total Qty : 0
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | `SITC of Boom Barriers with up to 6 mtr Aluminium Extruded Telescopic (for length adjustment) Arm having red reflecting tapes and powder coated with white colour including Brushless DC Motor( up to 100 Watt) , drive unit for smooth operation and controller with push buttons (raise, lower and stop) with on-site speed and angle adjustments. The barrier should have reversal of boom on getting in touch with an obstruction for safety. The barrier should offer an opening time up to 2-6 sec for Open/Close with 100% Duty Cycle and MCBF of 12 million cycles and IP rating of IP 65,CE Certification duly certified by NABL accredited labs` Warranty : 12 months Make : Neptune , Magnetic Autocontrol , Faac ) : With Prior Aproval Of Engineer In Charge Accessories `SITC of IR Beam Photosensors for safety at all Boom Barrier systems including cabling/ducting required including the RXandTX modules operated on 24VDC and having potentio- free contacts of NO/NC. The Safety Sensors shall installed on MS Poles which shall be Powder coated having base plate to bolt down and provision for the RX/TX modules to fix on the same along with cables entry to terminate. The Sensors will have adjustable eye to align the IR beam within the range of minimum 15mtrs etc complete as reqd.` `SITC of LED Traffic Light, 24 V (DC)/230 V (AC) , Red and Green Colour with complete housing and IP65 protection for outdoor use, complete with mounting arrangement and pole` `SITC of Interlocking Relay Circuit Panel for integrating Boom Barrier with Raise/Lower proximity limits to Automatically control Traffic Lights including providing Power Supply for Relay circuit of 12V, 1.5Amp rating along with Re-programming of the Controller for Boom Barrier integration with Raise/LowervCommands for traffic light functions, including cabling and ducting works` `Supply of Receiver for barrier and remote (transmitter) for barrier UP/DN/STP` Installation/Labour Charges Civil Work including marking and construction of foundation on both sides as per requirement with prior approval of Engineer In Charge Electrical Work including providing and laying of wires, conduits, bends etc as per site requirement with prior approval of Engineer In charge | $5.000 | Job |
| 2 | SITC of microprocessor based operation, digitally controlled voltage very low frequency door frame metal detector loaded with necessary software etc complete as required. Capable to detect all Metals, Zinc and Metal Alloys using single detection Prog to detect ferrous/non-ferrous metals at any location. Tested to IS: 14132: 1992. Continuous active detection capability, also quick reset capability after each detection. Uniform sensitivity throughout the door frame. Error Free reliable operation for various object speeds (slow walk speed). Minimum Nine zones, all zones overlapping to each other: Left Top, Centre Top, Right Top, Left Middle, Centre Middle, Right Middle, L eft Bottom, Centre Bottom, and Right Bottom. The Magnetic field of the DFMD Equipment harmless to magnetic media, electronics device supported by Test certificate from NABL (India) accredited labs. Should have IP rating 54.Warranty 12 months Make ( Motwane , Rapiscan , Garrette ) With Prior Aproval Of Engineer In Charge | $2.000 | Nos. |
| 3 | Supply /Providing of Hand Held Metal Detector. Hand-Held Metal Detector (HHMD) shall be able to detect metal without being in direct contact with the object. The detector shall have an audible and visual alarm to indicate the detection of metal. HHMD shall be constructed to work on commonly available disposable or rechargeable Batteries. Quick and simple battery change shall be possible without using special tools. The unit shall have an independent portable battery charger. HHMD shall be equipped with an indicator to indicate battery status. Durability through shock-resistance (product can with stand drops or falls from upto 1m.) Conforms to the NIJ 0602.02 and the new NIJ 0602.03 Standards for metal detection. Conforms to the international standards currently applicable for safety, EMC and to the applicable CE regulations . Warranty 12 months Make ( Motwane , Rapiscan , Garrette ) With Prior Aproval Of Engineer In Charge | $5.000 | Nos. |
| 4 | `SITC Of CONVEX MIRROR 1000 MM The body of the Convex Mirror should be made of finest Quality ABS Material and Poly-carbonate Sheet. Convex Mirror should be UV Stabilized with Orange / Red color. Convex Mirror should be in Circular round shape. Convex Mirror should be provided with installation kit (fixing brackets, nut bolts etc.). Convex Mirror should be installed with the help of clamp and Nut Bolts on MS Pole of 2 meter long and 75 mm dia . The pipe should be fixed to the ground in Foundation Concrete or square plate. OR Convex Mirror should be installed with the help of clamp, Nut Bolts and Wall Mounting Bracket on Wall.Warranty 12 months Make : Dark Eye , Avery Dennison , Safe Zone )With Prior Aproval Of Engineer In Charge | $1.000 | Nos. |
| 5 | `SITC of SPRING POST 710 mm The body of Spring Post should be made of virgin special flexible material PU (Polyurethane). It should be quickly restore to its original state without doing any damage to spring post as well as vehicles in case of high speed collision by vehicles.Two bands of special Heat Transfer Tape of a minimum 75 mm width must be pasted through Heat Transfer Pasting Technology around the Spring Post which protects it from getting cut and tear and give better and clear visibility in night and provide very long life.It should keep excellent mechanical and chemical properties such as impact resistance and tensile strength thus withstands in very hot or very cold temperatures.It should have Ultra Violet stabilizer so that it is not discolored even after long time. It should be in three different parts: upper tubuler part should be made out of PU and two bottom parts should be made out of ABS (Astronitrilite Butadiene Styrene).All three parts should be assembled together with the help of three nuts and bolts to be used for installation too.Special epoxy bond is used to fix the Spring Post with road surface. The bond should be so strong that post will not be deviated by strong impact after installation. 31 Springs/Rings should be molded in the Spring Post to ensure complete flexibility of the product. 18 mm hole provided on top for fixing of hooks etc. Dimensions of the Spring Post should be: Length 710mm, upper dia 80mm and bottom dia is 210mm approx.Total weight of the Spring Post should be 1795 grams approx.Warranty 12 months Laboratory Testing for the following * The Spring Post should be tested for Material Identification for Poly Urethane (PU). * Its Tensile Strength at break should be 27.54 N/mm2 as per ASTM D 638. * Its Elongation at break should be 251.38% as per ASTM D 638s. * Its UV Weathering should be tested for 24 hours as per ASTM G 154. Make : Dark Eye , Avery Dennison , Safe Zone ) With Prior Aproval Of Engineer In Charge | $50.000 | Nos. |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054