- Home
- >
- Tender
- >
- Odisha Tender
- >
- Department of GOVERNMENT OF ORISSA
- >
NTID 47278864
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply And Installation Of Dec in Puri - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply And Installation Of Dec" in Puri, India.
- Opening Date : Fri 6th November, 2026
- Closing Date : Thu 5th November, 2026
- ₹ 8312856.00
- NTID 47278864
Key Values: Document Cost: 10000.00 | EMD: 83129.00 | Estimated Cost: 8312856.00
Tender Description
Supply And Installation Of Decorative Poles Street Light For Urban Road Lighting In The District Of Baragada.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
83129.00 -
Document Cost
10000.00 -
Estimated Cost
8312856.00
BOQ Items Total Items : 13 | Total Qty : 2393
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | SITC of 8 Meter long Dhanush Design double arm decorative pole made of circular GI pipe of two section (grade YST 210), Bottom section 139.7mm Dia x 3.6mm thick or (+/-5%) or higher & Top section 114.3mm Dia x 3.2mm thick or (+/-5%) or higher and wind speed of 180 km/hr. Pole having decorative base made of Gravity die-cast aluminium of dimenssion (436mm Dia x 602mm Height), 3nos decorative die cast aluminium cone on the middle of thDhanush design double arm bracket stem made of GI Pipe Ø76mm Dia x 2.6mm thick with artistically curved pipe Ø60mm Dia x 2.6mm thick . Pole having pressure die-cast aluminium service door of dimenssion 348mm height x 110mm width (+/-5%) shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. GI mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 700mm bolts of grade 4.6 at CC 215. The base plate have a cable entry hole of 70mm for cable in & out. All dimension are within (+/- 5%) tolerance. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with pure polyester powder coating (coating thickness 60-80 microns). The Pole shall be finished with Black & Gold Embellishment with all materials & labour as required as per the direction of Engineer-in-Charge. (Make: K-Lite/Jaquar/Homdec/Reytek/Ligmen/Neri). N.B;Final design of pole and GA Drawing shall be approved by concerned civil wing(SE/CCE/Competant authority) before execution of the work. Indicatve GA Drawing oand View of Pole has been enclosed in the DTCN. | 80 | Nos |
| 2 | SITC of 150W,110 lm/W or higher LED Pendent light having Extruded aluminium with Spun Aluminium Top housing and coated with zinc rich primer & pure polyester powder coating of Jet Black Finish, UV Stabilized clear Polycarbonate diffuser and suitable for mounting on Ø38mm OD pipe. Luminaries should have dimenssion of Ø634 x 676mm (+/-5%) or higher with CCT-5700K, CRI-≥70, IP-66, IK-08, Lumen maintainance >60,000 burning hours as per L70 B10, Power Factor : >0.95, THD : <10%, Surge Protection : Inbuilt 6KV, external 10 kV Efficiency : >85%, Optical Distribution : Type II/Type III. The lighting manufacturer must have own NABL Approved lab to justify the lumen efficacy, IP-66 protection and other parameters as required by the Engineer-in-Charge.The light fixture shall have 5 years warranty. N.B: LM79,IP 66 ,IK 08 reports of the light fixture from third party/central/state govt accredited NABL lab is to be submitted and duly approved from SE(Electrical circle) R&B. Alongwith the above said reports, the LUX design report and Technical data sheet of light are also to be submitted and duly approved from SE(Electrical circle) R&B prior to procurement of material. (Make: K-Lite Pelican Fort KL-21814 /Jaquar/Homdec/Reytek/Philips/Havells/Panasonic/LT/Bajaj/Wipro Make of LEDs -CREE / LUMILEDS / OSRAM /NICHIA.). | 160 | Nos |
| 3 | Construction of RCC foundation by using M20 grade RCC and Fe 415 grade reinforcement in the foundation by considering the SBC as 10 T per sq mtr and fixing the 4 nos. fdn bolts in that foundation for installation of pole with street light on that foundation(Details Drawing of the foundation attached). The work shall be excuted as per the direction of EIC.The structural calculation, wind load calculation and civil foundation shall be duly approved by the competent authority from civil wing (SE/CCE/Competant authority)before execution of the work. | 80 | Nos |
| 4 | Wiring of 3 core 1.50 mm2 round flexible copper cable from junction box to light fitting in complete as per the direction of Engineer-in-charge. Make-Havells/KEI/Finolex/Polycab/Gloster/RR Kabel | 1600 | mtr |
| 5 | Supplying & Testing of 1.1 KV grade Aluminium XLPE armoured power cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. (Make:- Polycab/ Havells/ KEI/Gloster/Finolex/RR Kabel) 4CX16 sqmm | 100 | Mtr |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054