- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of Uttar Pradesh Jal Vidyut Nigam Limited
- >
NTID 43220819
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSupply And Fixing Of New Preco in Lalitpur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Supply And Fixing Of New Preco" in Lalitpur, India.
Uttar Pradesh Jal Vidyut Nigam Limited
Lalitpur, Uttar Pradesh, India
NTID 43220819
- Opening Date : Sat 17th January, 2026
- Closing Date : Sat 17th January, 2026
- ₹ 0.00
- NTID 43220819
Key Values: Document Cost: 1180.00 | EMD: 27000.00 | Estimated Cost: 0.00
Tender Description
Supply And Fixing Of New Precoated Profile Sheets In Place Of Old Rusted And Leaked G.c. Iron Sheet On Roof At Sheetla Power House Moth, Dist. Jhansi
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
27000.00 -
Document Cost
1180.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 12 | Total Qty : 5421.9
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Dismantling corrugated iron roof sheet and stacking of materials as directed by Engg-in-charge within a distance of 60 mtrs. | 987.66 | SQM |
| 2 | Providing and fixing precoated galvanised iron profile sheets (Tata,Jindal,Hindalco or Bhushan make,size, shape and pitch of corrugation as approved by Engineer in-charge) 0.70 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, including the cost of J or L hooks 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling/self tapping screws of size ( 5.5 * 55mm with EPDM seal, complete upto any pitch horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses& including cutting to size and shape wherever required and also including all safety equipments, including all scalfolding etc required. | 901.56 | SQM |
| 3 | Supply and fixing 22 B.W.G. Galvanized Iron Ridges valley and gutters for roofing fixed with J or U bolts 10mm. dia with G.I. Limpet & bitumen washers including supply of all Materials, labour,wastage and T&P etc.required for proper completion of the work. | 123 | RM |
| 4 | Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. | 0.1 | MT |
| 5 | P/F fully Anodized aluminium for openable window with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawing including providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminium sections should be 20 microns with a (+) 2 microns tolerance. The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. | 6.26 | SQM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054