- Home
- >
- Tender
- >
- Madhya Pradesh Tender
- >
- Department of Military Engineer Services
- >
NTID 39823745
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Special Repair T in SAUGOR - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Special Repair T" in SAUGOR, India.
Military Engineer Services
SAUGOR, Madhya Pradesh, India
NTID 39823745
- Opening Date : Wed 23rd April, 2025
- Closing Date : Mon 21st April, 2025
- ₹ 3590000.00
- NTID 39823745
Key Values: Document Cost: 500.00 | EMD: 71800.00 | Estimated Cost: 3590000.00
Tender Description
Corrigendum : Special Repair To Water Proofing Treatment Of Building No. F-11 In Area Of Age B/r-ii Under Ge Saugor
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
71800.00 -
Document Cost
500.00 -
Estimated Cost
3590000.00
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum |
| 2 | Corrigendum No 01 | BOQ |
| 3 | Corrigendum No. 02 | Other |
BOQ Items Total Items : 31 | Total Qty : 7145.54
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:- | 1300.00 | Sqm |
| 2 | Item No. 1.00 Contd... (i) The surface of roof,parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain and outlets a groove shall be cut as specified and directed. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv) Laying of water proofing teratment of weight not less than 3 Kg / sqm and thickness not less then 3 mm APP modified polymeric water proofing membrane composed of 90 micron ( 10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (vi) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including M&L for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site complete all as specified and directed. | ||
| 3 | M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm and thickness not less then 2mm comprising with following items complete all as specified and directed:- | 280.00 | Sqm |
| 4 | Item No. 2.00 Contd... (i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (ii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 90 micron ( 10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (v) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (vi) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site . (vii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded and including M&L for cutting of grooves at wall all around 65mm deep 10mm wide for APP membrane to be laid in gap as required on site complete all as specified and directed. | ||
| 5 | M&L for cool roof tiles 8-10 mm thick 300mmX 300mm in size white/ plain in colour conforming to sun reflective Index (SRI) value minimum of 90, over and including 15mm thick 1:3 Screed bed fixed with 3 mm spacers and joints shall be filled with epoxy grout complete all as specified and directed. | 1284.00 | Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054