- Home
- >
- Tender
- >
- Assam Tender
- >
- Department of Military Engineer Services
- >
NTID 46089379
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSpecial Repair Replacement Of in Dinjan - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Special Repair Replacement Of " in Dinjan, India.
- Opening Date : Mon 24th August, 2026
- Closing Date : Mon 17th August, 2026
- ₹ 7150000.00
- NTID 46089379
Key Values: Document Cost: 1000.00 | EMD: 132500.00 | Estimated Cost: 7150000.00
Tender Description
Special Repair Replacement Of Security Lights Along Perimeter Fence Depot And Unit Area Of Dou In Dinjan Mil Stn
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
132500.00 -
Document Cost
1000.00 -
Estimated Cost
7150000.00
BOQ Items Total Items : 27 | Total Qty : 16548.95
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant with system lumen efficiency not less then 130lm/w, lumen output not less than 7800 lumens, CCT 5700 K, CRI > 70, IP Protection 66, IK08 impact resistance, isolated constant current current driver with PF ≥ 0.95 and THD upto 10%, operating on 140-270 V AC, 50 Hz supply, Lens bean angle T2 with inbuilt surge protection of 6 KV internal & SPD 10 KV, LED life expectancy upto 50000 burning hrs, product warranty of 05 years complete all as specified. | 97 | Each |
| 2 | S&F new PVC cable Junction Box IP66 "halogen free and weather proof" for out door installation size not less than 200 x 150 x 100 mm suitable for street light incoming and outgoing cables up to 10 to 25 sqmm 4 core (with terminal) & inclusive of MCB SP 10 Amp, 60A 04 strip aluminium Bus Bar, including nuts,bolts,cable glands & MS clamps fixed to pole all as directed. | 56 | Each |
| 3 | S&F lay cable PVC insulated industrials flexible FR 1100 volt grade with stranded cooper conductor of size 1.5 sqmm 3 core in suitable PVC conduit latest provision of complete all as specified and directed. | 679 | RM |
| 4 | M&L for steel tubular swaged poles conforming to latest provision of IS : 2713 (Part 1 to m) 1980 complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including two coats of aluminium paint over a coat of primer except the planting depth of 1.5m which shall be painted with 2 coats of black bituminous paint both internally and externally including writing pole number using suitable paint complete all as specified and as directed. Note : (i) Excavation and earth work, PCC filling shall be measured and paid separately. (ii) Foundation should be as per zonal approved TD drawing No TD/EM/9 Sheet No 1/1 (iii) Rates f steel tubular poles also include provision of finial and cast iron base plate fixed to poles finials and base plate shall be of cast iron and confirm to the details given in fig 3 and 4 of IS : 2713-Part 1 to 3-1980. (iv) The rates also include drilling of holes in steel tubular poles for fixing 'D' iron clamps and hooks for continuous wire, G.I earth wire casing coping etc. to the required size and number. (v) The sections of the pole in outer dia & thickness shall be as: - 165.1 X 4.5mm for 5 meter length from bottom then 139.7 X 4.5mm for next 2m length & 114.3 X 3.65 for remaining length. (vi) Approx Wt of pole shall be 147 kg. (vii) Tubes making poles shall be out of steel conforming to minimum grade of YSt 240C (with minimum tensile strength of 410 MPa) | 56 | Each |
| 5 | M&L for bracket for street light fitting made of 32/40 mm bore medium grade GI tube bent to shape required, fixed with and including MS flat iron clmaps, bolts n, buts w, washers duly painting the bracket with two coats of alumium paint over a coat of zinc chrome primer complete including taking down the existing bracket and refixing and connecting up the light fittignetc all as directed. | 97 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054