- Home
- >
- Tender
- >
- Himachal Pradesh Tender
- >
- Department of Public Works Department
- >
NTID 44666488
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertSh - Providing And Laying 30 M in Dharamshala - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Sh - Providing And Laying 30 M" in Dharamshala, India.
Public Works Department
Dharamshala, Himachal Pradesh, India
NTID 44666488
- Opening Date : Sat 4th April, 2026
- Closing Date : Fri 3rd April, 2026
- ₹ 5744814.00
- NTID 44666488
Key Values: Document Cost: 2000.00 | EMD: 114900.00 | Estimated Cost: 5744814.00
Tender Description
Sh - Providing And Laying 30 Mm Thick Bituminous Concrete Laying With Paver Finisher And Hot Thermoplastic Compond Edge/ Centre Line In Km 0/000 To 2/000 - Annual Maintenance Plan (AMP for the year 2026-27) on Chetru Sheela Dari Road km 0/000 to 6/600 under Rural Road in Distt. Kangra HP (SH :- Providing and Laying 30 mm thick Bituminous Concrete laying with Paver Finisher and hot thermoplastic compond Edge/ Centre line in km 0/000 to 2/000 )
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
114900.00 -
Document Cost
2000.00 -
Estimated Cost
5744814.00
BOQ Items Total Items : 4 | Total Qty : 14084.93
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a one layer composite construction of crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm as per Technical Specification Clause 505, as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government | 620.50 | Per Square meter |
| 2 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kgs (Zero twenty five into Zero decimal to three Zero kilogram) per square metre on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 12586.86 | Per Square meter |
| 3 | Providing and laying 30mm (Thirty milimetres) thick bituminous concrete with 100-120 TPH batch type HMP (Hot Mix Plant) producing an average output of 75 tonnes (Seventy five) tonne per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-10 (Viscosity grade-Ten) @ 5.4% to 5.6% (Five point Four to Five point Six) percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 509 complete in all respect and as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 377.61 | Per Cubic Meter |
| 4 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes, as per direction of Engineer-Incharge including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government. | 499.96 | Per Square meter |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054