- Home
- >
- Tender
- >
- Punjab Tender
- >
- Department of Panjab University
- >
NTID 43220390
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRenovation Of Research Lab No in Rupnagar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Renovation Of Research Lab No " in Rupnagar, India.
- Opening Date : Fri 26th December, 2025
- Closing Date : Wed 24th December, 2025
- ₹ 2000000.00
- NTID 43220390
Key Values: Document Cost: 0.00 | EMD: 40000.00 | Estimated Cost: 2000000.00
Tender Description
Renovation Of Research Lab No.1 (room No 217) At 1st Floor Of Department Of Chemistry In P.u. Campus, Sec-14, Chandigarh
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
40000.00 -
Document Cost
Refer Documents -
Estimated Cost
2000000.00
BOQ Items Total Items : 6 | Total Qty : 10
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply of Furniture/fixture fittings | ||
| 2 | Island laboratory table for overall dimension 4800mm(L)X1500mm(W)X900mm(H) Modular table shall consist of 3 nos storage cabinet of 750mm(L) on each side of one drawer & below it twin swing door, 2nos storage of cabinet of 600mm(L)having a swing door, 2 nos sink unit PP sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with locking facility. The body of storage of cabinet should be made of 0.8mm thick CRCA MS sheet having double side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick CRCA MS sheet. The swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. Handles of the shutter should be PVC recessed. Each storage cabinet sink module should be provided with base frame made from30x30x1.2mm CRCA square pipe having nylon adjusters. 3nos Reagant rack of 1200mm length shall be moduler design consisting of bottom frame made of 30x30x1.2 CRCA square pipe and horizontal 2 stage storage of sheleves of 300mm D and reagant rack heghit shall be 650mm. Electrical fitting: 2nos. socket of 5&15 AMP should be provided beow the bottom shelf or regent rack. Top of the table shall be granite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be rounded off. Drainage pipes and water line provision will be laid down by client. | 1.00 | nos. |
| 3 | Wall Side laboratory table for overall dimension 4200mm(L)X750mm(W)X900mm(H) Modular table shall consist of 3 nos storage cabinet of 750mm(L) of one drawer & below it twin swing door, storage cabinets of the lab table shall be provided with locking facility. The body of storage of cabinet should be made of 0.8mm thick CRCA MS sheet having double side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick CRCA MS sheet. The swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. Handles of the shutter should be PVC recessed. Each storage cabinet sink module should be provided with base frame made from30x30x1.2mm CRCA square pipe having nylon adjusters. 3nos Reagant rack of 1200mm length shall be moduler design consisting of bottom frame made of 30x30x1.2 CRCA square pipe and horizontal 2 stage storage of sheleves of 300mm D and reagant rack heghit shall be 650mm. Electrical fitting: 2nos. socket of 5&15 AMP should be provided beow the bottom shelf or regent rack. Top of the table shall be granite of 18mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be rounded off. Drainage pipes and water line provision will be laid down by client. | 1.00 | nos. |
| 4 | Wall side laboratory table for overall dimension 6600mm(L)X750mm(W)X900mm(H) Modular table shall consist of 6 nos storage cabinet of 750mm(L) twin swing door, 2nos storage of cabinet of 600mm(L)having a swing door, 2 nos sink unit PP sink with a 2-way goose neck tap, storage cabinets of the lab table shall be provided with locking facility. The body of storage of cabinet should be made of 0.8mm thick CRCA MS sheet having double side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick CRCA MS sheet. The swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. Handles of the shutter should be PVC recessed. Each storage cabinet sink module should be provided with base frame made from30x30x1.2mm CRCA square pipe having nylon adjusters. The thickness of granite shall be 18mm if required at site. | 1.00 | nos. |
| 5 | Wall Side laboratory table for overall dimension 2400mm(L)X750mm(W)X900mm(H) Modular table shall consist of 2 nos storage cabinet of 750mm(L) of one drawer & below it twin swing door, storage cabinets of the lab table shall be provided with locking facility. or equivalent. The body of storage of cabinet should be made of 0.8mm thick CRCA MS sheet having double side wall and door should be 16mm to 18mm thick with square edges made of 1mm thick CRCA MS sheet. The swing door should be affixed with zero crank hydraulic steel hinges and drawers move on ball slide tetescopic channels. Handles of the shutter should be PVC recessed. Each storage cabinet sink module should be provided with base frame made from30x30x1.2mm CRCA square pipe having nylon adjusters. 2nos Reagant rack of 1200mm length shall be moduler design consisting of bottom frame made of 30x30x1.2 CRCA square pipe and horizontal 2 stage storage of sheleves of 300mm D and reagant rack heghit shall be 650mm. Electrical fitting: 2nos. socket of 5&15 AMP should be provided beow the bottom shelf or regent rack. Top of the table shall be granite of 17mm thickness supported with 12mm thick ply underneath, sharp corner edges of the granite should be rounded off. Drainage pipes and water line provision will be laid down by client. | 1.00 | nos. |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054