- Home
- >
- Tender
- >
- Uttarakhand Tender
- >
- Department of National Hydroelectric Power Corporation Limited
- >
NTID 44594361
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertRenovation And Modification Of in Dharchula - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Renovation And Modification Of" in Dharchula, India.
National Hydroelectric Power Corporation Limited
Dharchula, Uttarakhand, India
NTID 44594361
- Opening Date : Thu 7th May, 2026
- Closing Date : Mon 27th April, 2026
- ₹ 46997465.00
- NTID 44594361
Key Values: Document Cost: 1770.00 | EMD: 940000.00 | Estimated Cost: 46997465.00
Tender Description
Renovation And Modification Of Control Room Of Power House And Dam With False Ceiling, Panelling Of Wall, Flooring And Construction Of Server Room Of Dhauliganga Power Station - Renovation and Modification of Control Room of Power House and Dam with false ceiling, panelling of wall, flooring and construction of server room of Dhauliganga Power station.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
940000.00 -
Document Cost
1770.00 -
Estimated Cost
46997465.00
BOQ Items Total Items : 51 | Total Qty : 24079.395
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply of Modular Rigid PVC Metal Panelling 1) Factory made removable type Modular Metal Panelling system. The front sheet shall be constructed from preformed textured hot-dip galvanized metal with a rigid polyvinyl-chloride (PVC) film on one side and a rust-resistant coating on the other side. The sheet thickness shall be no less than 0.6mm. The overall system thickness shall range between 80-90mm.The metal panelling/partition shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate to be submitted along with the technical bid. 2) Tiles Perforation To achieve acoustics without deteriorating the aesthetical appeal of the Control room it is necessary that the wall panelling shall have micro-perforations (less than 1.6mm diameter each) atleast 25% of the panelling area with a density of 5000 holes per square feet. UL audit certified design feature on modular wall panelling tile having clean perforations and providing smooth finish on front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. Valid UL audit certificate to be submitted along with the technical bid. 3) The modular metal panelling shall comply to the lead-free directive to ensure restriction of hazardous substances so that the final product does not contaminate the environment. The final product i.e., modular metal panelling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal panelling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid. 4) Seismic safety of user & Control room equipment is a prime concern area. The metal panelling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 or better vibrations. The test shall be carried out by authorized government agency. Test Report to be submitted along with the technical bid. 5) The wall panelling shall be robust & strong enough to sustain the routine loads/minor impacts of typical Control room environment. The wall panelling/partition structure shall have UL audit certified feature of Load bearing capacity of 300 Kgs to hold any display unit on clamp having minimum length of 750mm. Valid UL audit certificate to be submitted along with the technical bid. 6 ) As Control room is a mission critical area and in an unlikely case of damage to the existing wall panelling tiles the same shall be replaceable within 120 seconds and thereby preventing loss of time of operators and ongoing operations. UL audit certified feature of modular wall panelling tile having secure locking arrangement for equidistant mounting. Locking arrangement enables easy replacement with using any tool within 120 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. Valid UL audit certificate to be submitted along with the technical bid. 7) From fire safety point of view the metal wall panelling tiles shall be class A fire rated as per the norms of comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fibre-cement board surfaces under the specific fire exposure conditions. The proposed non perforated wall panelling tiles shall be Class A certified as per ASTM e84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid. 8) The structural framework shall include vertical tubular galvanized iron (GI) pipes securely installed between top and bottom GI frames. | 4172.00 | Sq.Ft |
| 2 | Supply of Curve/Bend Modular Rigid PVC Metal Panelling 1) Factory made removable type inter lockable metal panels. The frame shall consist of 25mm wide extruded aluminum top & bottom sections & die casted aluminum caps at extreme end, this frame shall hold front sheet. Front sheet shall be made up of preformed textured hot dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm). Overall system thickness for panelling shall be 65mm to 75mm. The metal panelling shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate to be submitted along with the technical bid. The shape shall be a perfect curve to provide more space for mounting of the LED. Panelling s curve shall be achieved by curved tiles only. Curvilinear arrangement using straight tiles (joined/ connected at angles) shall be deemed unacceptable. | 270.00 | Sq.Ft |
| 3 | Supply of Printed Metal Panelling 1) The printed panelling shall be done on powder coated metal panelling, the front tile shall be digitally printed. Graphics shall be approved by the Customer. 2) Digital printing shall be done on modular metal Panelling. Pasting stickers/flex/vinyl on metal tile shall be deemed unacceptable | 140.00 | Sq.Ft |
| 4 | Supply of ACP (For Exterior) ACP 4mm Thick (4050) Solid/Metallic 4mm Thick, Alumunium Composite Panel, it shall consist of thermoplastic of Low Density polyethylene (LDPE) sandwiched between 2 skins of Aluminium sheets. Sandwiched composite panel finished with PVDF coated with 70% Kynar 500 and 30% Resin or Lumiflon based Fluoropolymer resin coating on approved colour and shade on face # 1. The reserve side coated with polyester - based wash coat /Polymer (Service) coating on face #2. | 3068.00 | Sq.Ft |
| 5 | Supply of Metal/Gypsum Panelling and all associated item for instalation : Metal/Gypsum paneling material with paint for top finish. The gypsum board panels shall be fixed with screws on single side (for paneling) of G.I frame. The structure is made up of GI stud and GI Channel. The GI channel s thickness shall be minimum 0.5mm and 120 (GSM) Galvanizing. | 3156.00 | Sq.Ft |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054