- Home
- >
- Tender
- >
- Punjab Tender
- >
- Department of Military Engineer Services
- >
NTID 47285182
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProvn Of Concertina Coil For P in Bhisiana - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Provn Of Concertina Coil For P" in Bhisiana, India.
- Opening Date : Thu 12th November, 2026
- Closing Date : Tue 10th November, 2026
- ₹ 970000.00
- NTID 47285182
Key Values: Document Cost: 500.00 | EMD: 19400.00 | Estimated Cost: 970000.00
Tender Description
Provn Of Concertina Coil For Poles At Bhisiana Under Ge (af) Bhisiana
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
BOQ Items Total Items : 4 | Total Qty : 6800
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Supply only of punched tape concertina barbed wire coil, manufactured from high-tensile galvanized steel wire with barbs, cold-drawn unalloyed steel wire of 2.60 mm diameter, having minimum tensile strength of 1670 N/mm², conforming to IS 4454 (Part 1):2001, hot-dip galvanized in accordance with the practice recommended in IS 2629, with zinc coating conforming to the heavily coated hard variety specified in Table 1 of IS 4826, having minimum zinc coating weight of 230 g/m² having short barbs of 11 ± 1 mm length, steel tape of 19 mm × 0.50 mm thickness with hardness of 137 to 187 VPN, suitable for perimeter of steel tubular pole, supplied in standard coil form and of required diameter as approved by the Engineer-in-Charge, including all necessary packing, handling and transportation, complete in all respects as specified and directed by the Engineer-in-Charge. | 1750 | Kg |
| 2 | Material and labour for providing, fabricating and fixing MS brackets/spikes/clamps for supporting and securing Concertina Barbed Wire coil around steel tubular poles, including cutting, drilling, bending, shaping and welding of MS sections/plates/rods/FI, provision of necessary nuts, bolts, washers and other fittings, welding wherever required, fixing to the steel tubular poles, proper alignment, spacing and securing of the complete support arrangement, including cleaning and removal of rust, dirt and applying two coats of aluminium paint to all exposed steel surfaces prior to fixing, including all necessary tools, tackles and incidental works, complete all as specified and as directed by the Engineer-in-Charge. | 3000 | Kg |
| 3 | Material and labour for providing and fixing high-tensile galvanised steel guide/tension plain wire, class 3, 4mm dia for supporting and retaining Concertina Barbed Wire coil around steel tubular poles, including supplying, cutting to required lengths, tensioning and fixing vertically between the top and bottom MS band clamps/supports, securing the wire firmly to the clamps/standoff arms and tying the Concertina coil thereto at suitable intervals with galvanised tie wires, complete all as specified and as directed by the Engineer-in-Charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) | 550 | Kg |
| 4 | Labour only for fixing of Concertina Barbed Wire coil around steel tubular poles, from bottom to top up to the height as directed by the Engineer-in-Charge, including lifting, positioning, winding, stretching and securing the Concertina coil to the MS brackets/spikes/clamps/supports, maintaining uniform spacing, proper tension and firm fixing throughout, including all necessary adjustments and incidental labour, complete all as specified and as directed by the Engineer-in-Charge. Notes: (i) Existing fittings, light brackets and other fixtures, if required to be taken down temporarily to facilitate lowering of the Concertina coil from the top of the pole and encapsulation of the pole, shall be carefully removed and subsequently refixed in their original position. The cost of taking down, storing/handling and refixing such fittings/fixtures shall be deemed included in the quoted rate. No separate payment shall be admissible on this account. (ii) Although the Concertina Barbed Wire coil is physically wound around the pole in spiral formation, measurement for payment shall be made in running metres (RM) of the vertical height of the pole over which the Concertina coil is fixed, irrespective of the diameter of the coil, number of turns/coils along the height or actual developed length of the Concertina Barbed Wire. (iii) The Concertina Barbed Wire coil and MS brackets/spikes/clamps/supports/nut bolts shall be measured and paid for separately under their respective items but cost for binding wire as required shall be included in overall quoted rates of BOQ. | 1500 | RM |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054