- Home
- >
- Tender
- >
- Haryana Tender
- >
- Department of Kurukshetra Development Board
- >
NTID 43891411
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding Of Highmast Lighting in Thanesar - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing Of Highmast Lighting" in Thanesar, India.
- Opening Date : Tue 17th February, 2026
- Closing Date : Mon 16th February, 2026
- ₹ 1271491.00
- NTID 43891411
Key Values: Document Cost: 1000.00 | EMD: 25500.00 | Estimated Cost: 1271491.00
Tender Description
Providing Of Highmast Lighting System In Tirath At Sisla And Pilni In District Kaithal
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
25500.00 -
Document Cost
1000.00 -
Estimated Cost
1271491.00
BOQ Items Total Items : 5 | Total Qty : 0
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | S/E/T/C of 100 W LED Flood light Luminaire 10 degree Calcius to 50 degree Calcius, operating voltage range-140V - 270W Housed in pressure Die cast Aluminum alloy for housing (Heat- sink) for effective thermal management sturdiness and corrosion resistance IP66 protected covered tempered protective toughened glass, thermal shock and impact resistance, fix to the housing with SS screws having lumen efficacy of LED = 120 lm/W with Colour 5700K PPC lens for uniformity inbuilt potted LED driver (SMPS based constant current supply) lower THD open circuit protection over voltage protection, surge protection, and other safety test as per IS:15885 and BIS comply make as per approved list attached complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work | $28.000 | Each |
| 2 | S/E/T/C of 150 W LED Flood light Luminaire 10 degree Calcius to 50 degree Calcius, operating voltage range-140V - 270V Housed in pressure Die cast Aluminum alloy for housing (Heat- sink) for effective thermal management sturdiness and corrosion resistance IP66 protected covered tempered protective toughened glass, thermal shock and impact resistance, fix to the housing with SS screws having lumen efficacy of LED - 120 1m/W with Colour 5700K, PPC lens for uniformity inbuilt potted LED driver (SMPS based constant current supply) lower THD open circuit protection, over voltage protection, surge protection, and other safety test as per IS:15885 and BIS comply make as per approved list attached complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. | $6.000 | Each |
| 3 | S/ET/C of 200W LED Flood Light Luminaire 10 degree Calcius to 50 degree Calcius, operating voltage range-140V - 270V Housed in pressure Die cast Aluminum alloy for housing (Heat sink) for effective thermal management sturdiness and corrosion resistance IP66 protected covered tempered protective toughened glass, thermal shock and impact resistance, fix to the housing with SS screws having lumen efficacy of LED = 120 lm/W with Colour 5700K, PPC lens for uniformity inbuilt potted LED driver (SMPS based constant current supply) lower THD open circuit protection over voltage protection, surge protection, and other safety test as per IS:15885 and BIS comply make as per approved list attached complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work | $24.000 | Each |
| 4 | Supply and Erection of Ring / coller bracket on existing pole with nuts and bolts. Bracket made of 50mm dia G1 pipe B class ISI 1.0 mtr. dia ring with 4 no. support 50mm dia bottom Gl collar pipe (GI) 100mm dia 60cm Long top covered with ornamental cap duly welded, 4 nos. hole in ring pipe for the erection of Rood light fitting painted 2 coats of aluminum paints on bracket including the cost of labor and petty material etc. complete in all respect upto the entire satisfaction of Engineer-in charge. Bracket duly erected on existing Octagonal pole | $4.000 | Each |
| 5 | S.I.T.C of 4 Core 2.5sqmm copper wire ISI mark Make Polycab KEI and Havells | $95.000 | Metre |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054