- Home
- >
- Tender
- >
- Delhi Tender
- >
- Department of NATIONAL LAW UNIVERSITY
- >
NTID 43163281
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertProviding And Fixing Of Gi C 8 in Delhi - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Providing And Fixing Of Gi C 8" in Delhi, India.
- Opening Date : Fri 19th December, 2025
- Closing Date : Fri 19th December, 2025
- ₹ 5784557.00
- NTID 43163281
Key Values: Document Cost: 0.00 | EMD: 115691.00 | Estimated Cost: 5784557.00
Tender Description
Providing And Fixing Of Gi C 84 False Ceiling In Place Of Existing Gypsum Board False Ceiling
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
115691.00 -
Document Cost
Refer Documents -
Estimated Cost
5784557.00
BOQ Items Total Items : 4 | Total Qty : 5202
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Demolishing thatch roofing including mats, bamboo, jaffari etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | 2551.00 | sqm |
| 2 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 100.00 | Cum |
| 3 | Providing and fixing false ceiling at all heights including providing and f ixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and f inishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board. | 200.00 | sqm |
| 4 | Providing and fixing 84 C ceiling system comprises of 84 mm x 12.5 mm panels with 23.9 mm flange roll formed out of 0.50 mm thick G.I coils. Panels shall be coil coated with 20 microns polyester paint coating on front side. Panels are fixed on to roll formed carriers 32 mm wide x 39 mm deep out of 0.5 mm G.I sheet with cutouts to hold the panels in module of 100 mm at maximum 1.2 m c/c without insulation and at maximum 1 m c/c with insulation. Carriers shall be 60 microns black color powder coating of polyester paint. Carriers are suspended from the roof or truss by 4 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1.2 m c/c. Hangers are fixed to the roof by J hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 5 m to suit site dimensions or shop drawings. G.I Edge profiles or wall angles are 24 mm X 24 mm X 0.35 mm thick and match the colour of the panel. Panel can be joint with the help of panel jointers. G.I.sheet with 100 GSM/ Per Sq. Mtr. Zinc Coating. | 2351.00 | sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054