- Home
- >
- Tender
- >
- Delhi Tender
- >
- Department of Indian Institute Of Technology Delhi
- >
NTID 43163468
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertMiscellaneous Repairing Repla in Delhi - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Miscellaneous Repairing Repla" in Delhi, India.
- Opening Date : Mon 22nd December, 2025
- Closing Date : Fri 19th December, 2025
- ₹ 1345050.00
- NTID 43163468
Key Values: Document Cost: 0.00 | EMD: 26901.00 | Estimated Cost: 1345050.00
Tender Description
Miscellaneous Repairing, Replacement And Maintenance Work In The Centralised Ac System Of Bharti And Sit Building, Iit Delhi
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
26901.00 -
Document Cost
Refer Documents -
Estimated Cost
1345050.00
BOQ Items Total Items : 25 | Total Qty : 561
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Replacement of Condenser water pump (horizontal axial split casing, UP 100/29) by providing, installation testing and commissioning of similar type pump set, CI casing and impeller, CS shaft, mechanical seal matching with existing suction (150 mm) and discharge (100 mm) pipe coupled with not less than15 kW / 20 HP, IE2 class, 1460 rpm suitable for run on 415 V 10%, 50 Hz ac supply with anti vibration mounting pads, proper alignment on the existing baseframe, modifications if any required, etc. complete as required. (Kirloskar UP100/29 and ABB / Kirloskar / CGL / Havells or similar superior make) | 1 | Each |
| 2 | Replacement of old and defective 125 A TPN MCCB in existing LT panel by providing and fixing of same rating and pole MCCB of breaking capacity not less than 16 kA with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. (Acceptable make: L&T / C&S / Crompton / Havells / Legrand / ABB) | 1 | Each |
| 3 | Replacement of existing old non-functional 65 mm 3 Way motorised valve in AHU line by providing and installing of same size 3 way motorised control valve, self-balancing, pressure independent type dynamic balancing valve with integrated 3 way modulating control valve in a single body fitted with actuator motor and thermostat. Proper thermal nitrile rubber insulation shall be provided on the exposed parts to avoid condensation. The actuator shall be capable of accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum. Post installation, testing and commissioning shall be done to the satisfaction of the Engineer-in-charge. (Acceptable make: Zoloto / Castle / Advance / Audco / Belimo / Honeywell / Johnson Control) | 4 | Each |
| 4 | Replacement of existing old non-functional 5/8'' size 3 Way motorised valve in FCU line by providing and installing of same size 3 way actuator valve, self-balancing, pressure independent type dynamic balancing valve with integrated 3 way modulating control valve in a single body fitted with actuator motor. The actuator shall be capable of accepting electric signal from existing thermostat and shall provide similar transduced feedback output to control system, providing insulating material on the exposed parts. Post installation, testing and commissioning shall be done to the satisfaction of the Engineer-in-charge. (Acceptable make: Zoloto / Castle / Advance / Audco / Belimo / Honeywell / Johnson Control) | 60 | Each |
| 5 | Replacement of existing old non-functional thermostat by providing and fixing Digital type thermostat including integrating with the FCU actuator valve for controlled operation etc. complete as required. (Acceptable make: Honeywell / Siemens / Belimo) | 60 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054