- Home
- >
- Tender
- >
- Madhya Pradesh Tender
- >
- Department of Raja Ramanna Centre for Advanced Technology Indore
- >
NTID 44647718
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertMaintenance Of Rolling Shutter in Indore - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Maintenance Of Rolling Shutter" in Indore, India.
Raja Ramanna Centre for Advanced Technology Indore
Indore, Madhya Pradesh, India
NTID 44647718
- Opening Date : Wed 22nd April, 2026
- Closing Date : Fri 17th April, 2026
- ₹ 8965000.00
- NTID 44647718
Key Values: Document Cost: 0.00 | EMD: 179300.00 | Estimated Cost: 8965000.00
Tender Description
Maintenance Of Rolling Shutters, Aluminum Doors, Windows And Partitions At Rrcat Indore.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
179300.00 -
Document Cost
Refer Documents -
Estimated Cost
8965000.00
BOQ Items Total Items : 152 | Total Qty : 8193
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Servicing of ELECTRICALLY OPERATED rolling shutters of all sizes and anywhere in RRCAT premises with or without wicket gates (without dismantling the shutter) including thorough cleaning of all the components, overhauling, greasing, reconditioning of end clips, realigning curtain ends, reconditioning the dents, if any on the surface of curtain, bottom rail and side guides including labourers, all welding, drilling, tentioning spring if needed, straightening, grinding, scaffolding, ladders, tools, tackles with all consumables such as lubricants, white kerosene, grease, screws, nuts, bolts, washers rivets etc, making good any damages to civil works, oiling, greasing, cleaning the area by disposing off scraps, debris etc and demonstrating proper functioning of the shutters after such service etc. complete as directed by Engineer-in-charge. | 1,800.00 | Sqm |
| 2 | Servicing of MECHANICALLY (GEAR) OPERATED rolling shutters of all sizes and anywhere in RRCAT's premises with or without wicket gates(without dismantling the shutter) including thorough cleaning of all the components, overhauling, greasing, reconditioning of end clips, realigning curtain ends, reconditioning the dents, if any on the surface of curtain, bottom rail and side guides including labourers, all welding, drilling, tentioning spring if needed, straightening, grinding, scaffolding, ladders, tools, tackles with all consumables such as lubricants, white kerosene, grease, screws, nuts, bolts, washers rivets etc, making good any damages to civil works, oiling, greasing, cleaning the area by disposing off scraps, debris etc and demonstrating proper functioning of the shutters after such service etc. complete as directed by Engineer-in-charge. | 1,000.00 | Sqm |
| 3 | Servicing of PULL & PUSH TYPE HAND OPERATED rolling shutters of all sizes and anywhere in RRCAT's premises with or without wicket gates (without dismantling the shutter) including thorough cleaning of all the components, overhauling, greasing, reconditioning of end clips, realigning curtain ends, reconditioning the dents, if any on the surface of curtain, bottom rail and side guides including labourers, all welding, drilling, tentioning spring if needed, straightening, grinding, scaffolding, ladders, tools, tackles with all consumables such as lubricants, white kerosene, grease, screws, nuts, bolts, washers rivets etc, making good any damages to civil works, oiling, greasing, cleaning the area by disposing off scraps, debris etc and demonstrating proper functioning of the shutters after such service etc. complete as directed by Engineer-in-charge. | 800.00 | Sqm |
| 4 | Servicing of ELECTRICALLY OPERATED rolling shutters with or without wicket gates by dismantling for overhauling of individual parts for repairs and after repairs i.e. top hood shaft cage, shaft brackets, springs, main curtain with lathe or mid bar type grills, wicket gate, side guides, bottom rails, gear units, bearings, electric motors, starters and thoroughly cleaning all the components, adjusting and tensioning springs, if needed, overhauling or repairing shaft and gear units, reconditioning end clips, realigning curtain ends, reconditioning dents, if any on the surface of curtain, bottom rail and side guides, repairing the starter, inspecting, taking out and replacing the damaged or defective components (replacement of part at quoted rate is payable separately under relevant item), ensuring proper locking arrangements, from both inside and outside including all welding, drilling, straightening, grinding, scaffolding, ladders, tools, tackles, with all consumables such as lubricants, white kerosene, grease etc. and small screws, washers, keys etc. making good any damages to civil works, cleaning the area by disposing off scraps, debris etc, oiling, greasing and demonstrating proper functioning of the shutters after such service etc. complete as directed by Engineer-in-charge. | 150.00 | Sqm |
| 5 | Servicing of MECHANICAL ( GEAR OPERATED) rolling shutters with or without wicket gates by dismantling for overhauling of individual parts for repairs and after repairs i.e. top hood shaft cage, shaft brackets, springs, main curtain with lathe or mid bar type grills, wicket gate, side guides, bottom rails, gear units, bearings, electric motors, starters and thoroughly cleaning of all the components, adjusting and tensioning springs if needed, overhauling or repairing shaft and gear units, reconditioning end clips, realigning curtain ends, reconditioning dents, if any on the surface of curtain, bottom rail and side guides, repairing the starter, inspecting, taking out and replacing the damaged or defective components (replacement of part at quoted rate is payable separately under relevant item), ensuring proper locking arrangements, from both inside and outside including all welding, drilling, straightening, grinding, scaffolding, ladders, tools, tackles, with all consumables such as lubricants white kerosene, grease etc. and small screws, washers, keys etc. making good any damages to civil works, cleaning the area by disposing off scraps, debris etc, oiling, greasing and demonstrating proper functioning of the shutters after such service etc. complete as directed by Engineer-in-charge | 30.00 | Sqm |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054