- Home
- >
- Tender
- >
- Uttar Pradesh Tender
- >
- Department of UP State Tourism Development Corporation Ltd.
- >
NTID 44691085
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertFacade Lighting Work At Gandhi in Rampur-UP - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Facade Lighting Work At Gandhi" in Rampur-UP, India.
UP State Tourism Development Corporation Ltd.
Rampur-UP, Uttar Pradesh, India
NTID 44691085
- Opening Date : Mon 13th April, 2026
- Closing Date : Mon 13th April, 2026
- ₹ 0.00
- NTID 44691085
Key Values: Document Cost: 5900.00 | EMD: 685000.00 | Estimated Cost: 0.00
Tender Description
Facade Lighting Work At Gandhi Ji Samadhi Sthal, Rampur - Detailed Estimate for Façade Lighting work at Gandhi Ji Samadhi Sthal, Rampur, UP
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
685000.00 -
Document Cost
5900.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 23 | Total Qty : 1802
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | SITC of 50W RGBW LED Flood light, suitable for highlighting architectural features. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 communication protocol. Operating temperature: -10 C to +50 C, LED life L70B50: 50000 hours at 50 C. Lumen output should be of >2500 Lumens with Full LED on. CRI >= 80 for white LED, Housing made of Pure polyester powder coated Aluminum die cast housing in White finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant, PMMA Lens, Beam angle of different types such as narrow(10 ), medium(25 ), wide(40 ,60 ) or elliptical(18 x 35 ) as per the site requirement. Fixture should be Toughened glass cover of 4mm thickness with High Impact Resistance strength of IK07 and IP66. LED should be of Osram/Lumileds/Cree, Built-In Potted IP66/67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection of 10kV with externally attached SPD. Weight of fixture 3 Kg, Dimension of the fixture should be (312x286x66) mm + 5% for better overall performance & long life. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. Make: Bajaj/Havells/K-Lite or equivalent as approved by Eng-in-charge | 15 | Nos |
| 2 | SITC of 50W Mono LED Flood light, suitable for highlighting architectural features. Luminaire shall be in 3000K CCT with Operating temperature: -10 C to +50 C, LED life L70B50: 50000 hours at 50 C. Lumen output should be of >4000 Lumens with Full LED on. CRI >= 80, Housing made of Pure polyester powder coated Aluminum die cast housing in White finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant, PMMA Lens, Beam angle of different types such as narrow(10 ), medium(25 ), wide(40 ,60 ) or elliptical(15 x 30 ) as per the site requirement. Fixture should be Toughened glass cover of 4mm thickness with High Impact Resistance strength of IK07 and IP66. LED should be of Osram/Lumileds/Cree, Built-In Potted IP66/67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection of 10kV with externally attached SPD. Weight of fixture 3 Kg, Dimension of the fixture should be (312x286x66) mm + 5% for better overall performance & long life. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. Make: Bajaj/Havells/K-Lite or equivalent as approved by Eng-in-charge | 20 | Nos |
| 3 | Supply of exterior rated Architectural Mono (3000K) Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness with lens positioned screening to reduce the light spillage and die casted end caps. Total System wattage not exceeding 40W with system lumen output should be more than >2800 lm with all LEDs on. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PMMA for each LED, offering beam angle of different types such as narrow(10 ), medium(25 ), wide(40 ,60 ) or elliptical(18 x36 ) as per the site requirement. Fixture should have Height 50mm 5% including surface mount base width 50mm 5% , length 1000 mm 5% with constant locking hinges for simple position control from various angles without special tools. The rated voltage of the Luminaire should be 240Vac, Luminaire shall be offered with integral BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, LED Driver should have Operating input voltage range: 90-305VAC, PF > 0.90. Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc 90 C. Fixture should be available with 10KV SPD in CM/DM Mode. Fixture's DMX Signal cable should be available with proper loop in loop out features. Fixture shall be suitable to operate at an ambient temperature range of -20 C to 50 C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 50,000 burning hours at 50 C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. Make: Bajaj/Havells/K-Lite or equivalent as approved by Eng-in-charge | 80 | Nos |
| 4 | Supply of exterior rated LED RGBW Flexible LED Strip with 14.4 Watt per meter. LED Strip should have 60Nos LEDs per meter through out the length with the silicon cover with system lumen output should be more than 700 lms /Meter. Standard Length of LED Strip is 5 Mtr and it shall be capable of producing dynamic color changing light for with 16 million colors and should be programmable using 8 bit control DMX512 protocol / Ethernet based control. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. DMX enabler circuit should be outside the Luminaire/LED Strip only. LED Strip shall be suitable to operate at an ambient temperature range of -20 C to 50 C. Life time shall be at least L70B50 @ 35000 burning hours at 50 C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF > 0.95 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90 C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary mounting accessories required for proper working of fixture including driver, decoder, aluminum profile with diffuser cover, weather proof connection cables, water proof connectors etc. as required. Make: Bajaj/Havells/K-Lite or equivalent as approved by Eng-in-charge | 40 | Nos |
| 5 | Supply, of exterior BIS registered 3000K Flexible LED Strip with 14.4 Watt per meter. LED Strip should have 60Nos LEDs per meter through out the length with the silicon cover with system lumens 1261 lms/meter and System Lumen Efficacy 87lm/w/meter. Standard Length of LED Strip is 5 mtr. The Strip should have IP 67 protection with inbuilt IP67 connectors at both ends. LED Strip shall be suitable to operate at an ambient temperature range of -20 C to 50 C. Life time shall be at least L70B50 @ 35000 burning hours at 50 C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya of 5050 SMD package only. The rated voltage of the Luminaire should be 24VDC, Luminaire shall be offered with a BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305Vac, PF > 0.95 and must have safety operation range form 90V - 176Vac. Life time of LED driver should be > 80,000 hours and MTBF of LED driver should be 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc > 90 C. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. Make: Bajaj/Havells/K-Lite or equivalent as approved by Eng-in-charge | 30 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054