- Home
- >
- Tender
- >
- Kerala Tender
- >
- Department of INKEL Limited
- >
NTID 43892247
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertDevelopment Of Govt Medical C in Ernakulam - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Development Of Govt Medical C" in Ernakulam, India.
- Opening Date : Mon 23rd February, 2026
- Closing Date : Fri 20th February, 2026
- ₹ 7689108.00
- NTID 43892247
Key Values: Document Cost: 2950.00 | EMD: 50000.00 | Estimated Cost: 7689108.00
Tender Description
Development Of Govt. Medical College, Ernakulam - Interior Furnishing Works (sh Supply Of Chairs)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
50000.00 -
Document Cost
2950.00 -
Estimated Cost
7689108.00
BOQ Items Total Items : 9 | Total Qty : 1256
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | CHAIRS | ||
| 2 | Providing, supplying and placing of Cafe Chair. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50 10 microns ) welded tubular frame should be made from 0 2.22 0.03 cm x 0.16 0.0128 cm and 3.5 0.03 cm x 1.5 0.03 cm x 0.16 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84. 5cm.Width-52.5 cm and Depth-55.8 cm. | 235.000 | no |
| 3 | Medium back chair :-suppling and placing of chair with following specifications,The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame.The inner frame shall be upholstered with mesh fabric and mounted on the main assembly.Lumber support made up of injection moulded in black P.P and upholstered with PU foam. Lumber support at fixed position.Size of back shall be (W)46.5cm-55cm, (H)58.0cm-60.5cm & size of seat shall be (W)47cm-50 cm x (D)44.0cm-48cmn +. Armrest . The arm top is made of soft moulded PU .The mechanism of chair shall have following features:360 degree revolving type, Synchro 1 mechanism, Tilt tension adjustment. The chair shall be provided with pneumatic height adjustment which shall have stroke of 95 +/- 5 mm. The pedestal shall be made of nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in PP . Overall dimensions of Chair shall range, Width of Chair 70.0cm-76.5cm, Depth of Chair 70.0 cm-76.5cm as measured from pedestal below. Height from ground - min 89.5cm - 102.5cm to max 100.5cm-111.5 cm. Seat height - min 43.3-44.5 cm to max 53.5 cm- 54.3cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. contractor shall obtain prior approval on submission of mock sample from Engineer in charge and as per approved list of make. | 262.000 | each |
| 4 | Three seater waiting area chair: Supplying and placing of chair with following specifications, perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steel with 0.2 ± 0.01 cm thickness. Seat-Back shell shall be 1.2 mm thick powder-coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with inserts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width50.0 cm- 54.5 cm per seat. Thickness of side bars is 4.5cm & gap between seats shall be min 2cm. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm- 91.0cm, Width & Depth of Chair as measured from ground - Width:173.5cm - 176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge and as per approved list of make. | 226.000 | set |
| 5 | Dining chair:supplying and placing of chair with following specifications,The seat and back shall be injection moulded in Polypropylene. They shall be fitted on the understructure assembly and shall be fixed with screws. Approximate Back Size shall be: 42.0cm. (W) X 38.5 cm. (H). and Approximate Seat Size shall be: 46 cm. (W) X 39.5 cm. (D). The understructure assembly shall be made of MS -ERW PIPE with Dia 19mm and of thickness 1.6mm and silver powder coated ( DFT 40-60 microns ). Overall Dimensions of Chair shall be Seat Height - 46.5 cm, Total Height from ground - 83.0cm, Width & Depth of Chair as measured from base - Width- 42.0cm and Depth-46 cm. Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge and as per approved list of make. | 76.000 | each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054