- Home
- >
- Tender
- >
- Chhattisgarh Tender
- >
- Department of Urban Administration and Development Department
- >
NTID 47295834
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertDevelopment And Upgradation Wo in Raigarh - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Development And Upgradation Wo" in Raigarh, India.
Urban Administration and Development Department
Raigarh, Chhattisgarh, India
NTID 47295834
- Opening Date : Wed 25th November, 2026
- Closing Date : Fri 20th November, 2026
- ₹ 0.00
- NTID 47295834
Tender Description
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
201500.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 2 | Total Qty : 3
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Applying stamping finish to the top surface of freshly laid lain /reinforcedcement concrete of specified grade in porticos, sidewalks, driveways,pool decks and open yards as per direction of the Engineer-in-Charge.The process shall include the following:- • The concrete shall be placed and screeded to the finished grade, andfloated to a uniform surface by using standard finishing techniques. Theapproved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. specifications. After initial curing the imprinted joints shall be groutedusing cement slurry mixed with color hardener as per the requirement.The surface shall be sealed by applying acrylic based sealer not less than0.167 litre/sqm.on finished surface. • The construction joints shall be provided by groove cutting of size 4mm x 20 mm in panel size 3m x 3 m or lesser as per the site conditionsand filling the same with 10 mm baker rod and providing and laying (PU)Polyurethane based joint sealer of approved make as per anufacturer’sspecifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (C ost of concrete for flooring is not included in this item which shall be paid separately.) | 2,562.00 | Sq.mtr |
| 2 | See the SOR Attechment | 01.00 | No |
Purchase Access To Download Selected Documents
₹ 200
Select this PlanFor a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Sales: +91 7383 93 4054