- Home
- >
- Tender
- >
- Jharkhand Tender
- >
- Department of Rajendra Institute of Medical Sciences
- >
NTID 43557541
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Supply Installa in Ranchi - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Supply Installa" in Ranchi, India.
- Opening Date : Tue 24th February, 2026
- Closing Date : Sat 21st February, 2026
- ₹ 0.00
- NTID 43557541
Key Values: Document Cost: 0.00 | EMD: 1000000.00 | Estimated Cost: 0.00
Tender Description
Corrigendum : Supply, Installation, Operationalization And Maintenance Of Fire Safety System With All Materials And Accessories In Trauma Centre, Superspeciality Block, Oncology Block And Paying Ward With All Material And Accessories At Rims, Ranchi.
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
1000000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Date extension notice | Date |
BOQ Items Total Items : 81 | Total Qty : 80
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Item name (warranty 2 years) | ||
| 2 | SITC of electric driven main fire Hydrant & Sprinkler pumps suitable for automatic operation complete in all respect as required & as per enclosed specification and consisting of the following: Horizontal type multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, to ensure minimum pressure of 3.5 kg/cm2 at highest and farthest outlet at specified flow of 2280 LPM & 85 m head conforming to IS- 1520 complete with mechanical seals, safety relief valve, pressure gauges on delivery side, drain and bypass arrangement for testing of pump complete. Suitable HP Squirrel cage Induction motor suitable for operation on 415V, 3 phase, 50Hz, AC supply for the above pump rating with synchronous speed of 1500 RPM, IE-3, TEFC type confirming to IS- 325 with IP:55 protection for enclosure, horizontal foot mounted with class F insulation, flexible coupling & coupling guard with the pump complete. Common bed plate fabricated from MS channel / ISMB with spring type vibration isolators. The pump set base shall be held by bolts grouted in the suitable cement concrete foundation duly plastered and painted including foundation bolts, washers complete etc. as required. | 1.000 | Nos |
| 3 | SITC of Diesel engine driven standby fire pump suitable for automatic operation complete in all respect as required & as per enclosed specification and consisting of the following: Horizontal type multistage, centrifugal, split casing pump of cast iron body and bronze impeller with SS shaft, to ensure minimum pressure of 3.5 Kg/Sqcm at the highest and farthest outlet at a flow 2280 LPM & 85 m head confirming to IS-1520 with mechanical seals, safety relief valve, pressure gauges on delivery side, drain and bypass arrangement for testing of pump complete. Radiator Water cooled diesel engine developing required BHP at 1500 RPM for the pump, flexible coupling & coupling guard with the pump & common bed plate for mounting of engine & pump shall confirming to relevant BS/IS standard with auto starting mechanism. The common base frame shall be held by bolts grouted in the concrete including foundation bolts, washers as required, vibration damping arrangement by cushy foot, engine panel with battery charger provided by engine manufacturer, connection to engine starting panel, SMF batteries of 12V/24V, 180AH with casing, lugs, stand & terminations to diesel engine, charger complete. Exhaust pipe of required length (discharge to leave above roof level as per standard) with 50mm thick glasswool pipe section, covered with aluminum cladding, residential silencer muffler, instruments & protection-stop solenoid for auto stop in the event of fault with auto indications, day oil tank of 200 ltrs.with first charge of diesel fabricated out of 4mm MS sheet with inlet/ outlet ON/OFF valves, level indicator, drain pipe, 15mm dia MS fuel line complete. Common bed plate of fabricated MS channel / ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable cement concrete foundation duly plastered and painted including foundation bolts, washers complete etc. as required | 1.000 | Nos |
| 4 | SITC of electric driven Pressurization/Jockey Pump suitable for automatic operation complete as required & as per enclosed specification and consisting of the following: Horizontal type end suction centrifugal, Jockey pump of cast iron body and bronze impeller, with SS shaft, to ensure at highest and farthest outlet at a flow of 180 LPM & 85 m head confirming to IS-1520 complete with necessary safety relief valve, drain, pressure gauge on the delivery side, drain and bypass arrangement for testing of the working of the pumping set as required. Suitable HP Squirrel cage induction motor suitable for operation on 415 V, 3 phase,50Hz, AC supply for the above pump with synchronous speed of 3000 RPM, IE-3, T.E.F.C. type confirming to IS - 325 with IP:55 protection for enclosure, horizontal foot mounted, class-F insulation, flexible coupling &coupling guard with the pump complete. Common base frame shall be fabricated from MS channel / ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable cement concrete foundation duly plastered and painted including foundation bolts, washers complete etc. as required | 1.000 | Nos |
| 5 | Supply, Installation, testing and commissioning of Pressure Switches in MS pipe for Hydrant Electric pump/ Sprinkler Electric pump / Diesel Engine Driven Pump / Jockey Pumps, diaphragm type, adjustable range from 0-10 kg/sq.cm and a regulation range of 0.1 - 1.5 kg/sq.cm direct mounted SNAP acting type made from die cast aluminium with epoxy powder coated finish and SS316 diaphragm and other wetted parts, including necessary wiring upto control panel & other materials as required as per specifications. | 1.000 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054