- Home
- >
- Tender
- >
- Maharashtra Tender
- >
- Department of Director of Technical Education Department Mumbai
- >
NTID 42999214
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertCorrigendum Repairing Denti in Pune - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Corrigendum Repairing Denti" in Pune, India.
Director of Technical Education Department Mumbai
Pune, Maharashtra, India
NTID 42999214
- Opening Date : Wed 24th December, 2025
- Closing Date : Tue 23rd December, 2025
- ₹ 0.00
- NTID 42999214
Key Values: Document Cost: 590.00 | EMD: 18000.00 | Estimated Cost: 0.00
Tender Description
Corrigendum : Repairing, Denting, And Painting Of Book Racks In The Library And Computer It Building At Coep Technological University, Pune
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
18000.00 -
Document Cost
590.00 -
Estimated Cost
Refer Documents
Latest Corrigendum List
| # | Corrigendum Title | Corrigendum Type |
|---|---|---|
| 1 | Bookrack Corrigendum | Date |
BOQ Items Total Items : 12 | Total Qty : 475
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Product Specification | ||
| 2 | Product Specification - 4 dr. bookrack ( 830 W x 310 D x 1680 H ) 1.Dismantling Remove all doors from the bookcase carefully.Detach handles, locks, and glass panels without causing damage.Keep all hardware safely for reassembly. 2.Surface Preparation - Cleaning: Remove dust, grease, rust, and old paint using sandpaper, wire brush, or approved chemical cleaners. Initial Sanding: Use emery paper (80 120 grit) to smoothen the surface for proper adhesion. Putty Application: Apply metal/wood putty to fill dents, holes, and imperfections. 3.Final Sanding: After putty dries, sand the surface again to achieve a uniform finish. 4. Repair Work- Replace broken glass panels with new glass of same size and thickness.bRepair or replace damaged locks and handles. Ensure all moving parts (hinges, locks) are functional. 5. Primer Application- Apply one coat of high-quality primer suitable for metal surfaces.Ensure uniform coverage and allow proper drying time. 6.Painting- Apply coat Duco furniture enamel paint using spray method. Light sanding between coats for smooth finish. Color: As approved by the department/engineer-in-charge. 7.Finishing- Ensure glossy, smooth, and defect-free finish. Remove any paint runs, sags, or uneven patches. 8.Alignment & Reassembly- Reassemble all parts including doors, glass panels, locks, and handles. Check alignment and functionality of doors and locks. Final inspection and touch-up as required. | 234.0000 | Nos |
| 3 | Product Specification -6 Door Bookrack ( 1070 W x 590 D x 2290 H ) Remove all doors from the bookcase carefully.Detach handles, locks, and glass panels without causing damage.Keep all hardware safely for reassembly. 1.Surface Preparation - Cleaning: Remove dust, grease, rust, and old paint using sandpaper, wire brush, or approved chemical cleaners. Initial Sanding: Use emery paper (80 120 grit) to smoothen the surface for proper adhesion. Putty Application: Apply metal/wood putty to fill dents, holes, and imperfections. Final Sanding: After putty dries, sand the surface again to achieve a uniform finish. 2.Repair Work- Replace broken glass panels with new glass of same size and thickness.Repair or replace damaged locks and handles. Ensure all moving parts (hinges, locks) are functional. 3.Primer Application Apply one coat of high-quality primer suitable for metal surfaces.Ensure uniform coverage and allow proper drying time. 4.Painting- Apply coat Duco furniture enamel paint using spray method. Light sanding between coats for smooth finish. Color: As approved by the department/engineer-in-charge. 5.Finishing- Ensure glossy, smooth, and defect-free finish. Remove any paint runs, sags, or uneven patches. 6.Alignment & Reassembly- Reassemble all parts including doors, glass panels, locks, and handles. Check alignment and functionality of doors and locks. Final inspection and touch-up as required. | 41.0000 | Nos |
| 4 | Product Specification - Sliding door Bookrack ( 990 W x 475 D x 1450 H ) Remove all doors from the bookcase carefully.Detach handles, locks, without causing damage.Keep all hardware safely for reassembly. 1.Surface Preparation - Cleaning: Remove dust, grease, rust, and old paint using sandpaper, wire brush, or approved chemical cleaners. Initial Sanding: Use emery paper (80 120 grit) to smoothen the surface for proper adhesion. Putty Application: Apply metal/wood putty to fill dents, holes, and imperfections. Final Sanding: After putty dries, sand the surface again to achieve a uniform finish. 2.Repair Work Repair or replace damaged locks and handles. Ensure all moving parts (hinges, locks) are functional. 3.Primer Application- Apply one coat of high-quality primer suitable for metal surfaces.Ensure uniform coverage and allow proper drying time. 4.Painting- Apply coat Duco furniture enamel paint using spray method. Light sanding between coats for smooth finish. Color: As approved by the department/engineer-in-charge. 5.Finishing- Ensure glossy, smooth, and defect-free finish. Remove any paint runs, sags, or uneven patches. 6.Alignment & Reassembly- Reassemble all parts including doors, locks, and handles. Check alignment and functionality of doors and locks.Final inspection and touch-up as required. | 18.0000 | Nos |
| 5 | Product Specification - Storwel Minor Cupboard ( 915 W x 515 D x 1250 H ) Remove all doors from the Cupboard carefully.Detach handles, locks, without causing damage. Keep all hardware safely for reassembly. 1.Surface Preparation - Cleaning: Remove dust, grease, rust, and old paint using sandpaper, wire brush, or approved chemical cleaners. Initial Sanding: Use emery paper (80 120 grit) to smoothen the surface for proper adhesion. Putty Application: Apply metal/wood putty to fill dents, holes, and imperfections. Final Sanding: After putty dries, sand the surface again to achieve a uniform finish. 2.Repair Work- Repair or replace damaged locks and handles. Ensure all moving parts (hinges, locks) are functional. 3.Primer Application- Apply one coat of high-quality primer suitable for metal surfaces.Ensure uniform coverage and allow proper drying time. 4.Painting- Apply coat Duco furniture enamel paint using spray method. Light sanding between coats for smooth finish. Color: As approved by the department/engineer-in-charge. 5.Finishing- Ensure glossy, smooth, and defect-free finish. Remove any paint runs, sags, or uneven patches. 6.Alignment & Reassembly- Reassemble all parts including doors, locks, and handles. Check alignment and functionality of doors and locks.Final inspection and touch-up as required. | 9.0000 | Nos |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054