ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertConstruction Of Dg Shed At Sil in Parganas - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Construction Of Dg Shed At Sil" in Parganas, India.
West Bengal Electronics Industry Development Corporation Limited
Parganas, West Bengal, India
NTID 43001041
- Opening Date : Mon 5th January, 2026
- Closing Date : Wed 31st December, 2025
- ₹ 0.00
- NTID 43001041
Key Values: Document Cost: 500.00 | EMD: 3000.00 | Estimated Cost: 0.00
Tender Description
Construction Of Dg Shed At Siliguri Phase 1 And 2 It Park
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
3000.00 -
Document Cost
500.00 -
Estimated Cost
Refer Documents
BOQ Items Total Items : 7 | Total Qty : 161.7
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Description | ||
| 2 | M.S. STRUCTURAL WORKS IN ROOF TRUSSES WITH TUBULAR SECTIONS CONFORMING TO IS: 806-1968 & IS: 1161- 1998 CONNECTED TO ONE ANOTHER WITH BRACKET, GUSSET CLEATS AS PER DESIGN, DIRECTION OF ENGINEER-IN CHARGE COMPLETE INCLUDING CUTTING TO REQUISITE SIZE, FABRICATION WITH NECESSARY METAL ARC WELDING CONFORMING TO IS: 816- 1969 & IS: 9595 USING ELECTRODES OF APPROVED MAKE AND BRAND CONFORMING TO IS:814- 2004, HAULAGE, HOISTING AND ERECTION ALL COMPLETE. THE RATE INCLUDES THE COST OF ROLLED STEEL SECTION,CONSUMABLES SUCH AS ELECTRODES, GAS AND HIRE CHARGE OF ALL TOOLS AND PLANTS AND LABOUR REQUIRED FOR THE WORK INCLUDING ALL INCIDENTAL CHARGES SUCH AS ELECTRICITY CHARGES, LABOUR INSURANCE CHARGES ETC. PAYMENT TO BE MADE ON THE BASIS OF CALCULATED WEIGHT OF STRUCTURAL TUBULAR MEMBERS AS SPECIFIED IN RELEVANT IS CODE IN FINISHED WORK. PAYMENT FOR GUSSET, BRACKET, CLEAT MAY BE MADE BY ADDING THE ACTUAL WEIGHT OF SUCH ITEMS WITH WEIGHT OF FINISHED STRUCTURAL MEMBERS. THE RATES ARE CONSIDERED FOR A HEIGHT OF ERECTION 8 M. / 2ND FLOOR LEVEL FROM THE GROUND. ADD 1.5 % EXTRA OVER THE RATE FOR EACH ADDITIONAL FLOOR OR 4M. BEYOND THE INITIAL 8 M. OR PART THEREOF For trusses spanning up to 12.00 m | 0.600 | MTS |
| 3 | M.S. STRUCTURAL WORKS IN COLUMNS, BEAMS ETC. WITH SIMPLE ROLLED STRUCTURAL MEMBERS (E.G. JOISTS, ANGLE, CHANNEL SECTIONS CONFORMING TO IS: 226, IS: 808 & SP (6)- 1964 CONNECTED TO ONE ANOTHER WITH BRACKET, GUSSETS, CLEATS AS PER DESIGN, DIRECTION OF ENGINEER-INCHARGE COMPLETE INCLUDING CUTTING TO REQUISITE SHAPE AND LENGTH, FABRICATION WITH NECESSARY BOLTING, METAL ARC WELDING CONFORMING TO IS: 816- 1969 & IS: 1995 USING ELECTRODES OF APPROVED MAKE AND BRAND CONFORMING TO IS:814- 2004, HAULAGE, HOISTING AND ERECTION ALL COMPLETE. THE RATE INCLUDES THE COST OF ROLLED STEEL SECTION, CONSUMABLES SUCH AS ELECTRODES, GAS AND HIRE CHARGE OF ALL TOOLS AND PLANTS AND LABOUR REQUIRED FOR THE WORK INCLUDING ALL INCIDENTAL CHAGES SUCH AS ELECTRICITY CHARGES, LABOUR INSURANCE CHARGES ETC. PAYMENT TO BE MADE ON THE BASIS OF CALCULATED WEIGHT OF STRUCTURAL MEMBERS ONLY IN FINISHED WORK AS PER IS SPECIFIED WEIGHT. PAYMENT FOR GUSSET, BRACKET, CLEAT, RIVETS, BOLTS AND NUTS MAY BE MAKE BY ADDING THE ACTUAL WEIGHT OF SUCH ITEMS WITH THE WEIGHT OF FINISHED STRUCTURAL MEMBERS OR 7% OF WEIGHT FOR FINISHED STRUCTURAL MEMBERS WEIGHING NOT LESS THAN 22.5 KG. / M. OR 15 % OF WEIGHT FOR FINISHED STRUCTAL MEMBERS WEIGHING LESS THAN 22.5 KG. / M. MAY BE INCREASED ALLOW FOR BRACKET, CLEAT, RIVET, BOLTS AND NUTS ETC. AND NO SEPERATE PAYMENT BEING MADE FOR THESE ITEMS, AS PER DIRECTION OF ENGINEER IN CHARGE. THE RATES ARE CONSIDERED FOR A HEIGHT OF ERECTION 8M. / 2ND FLOOR LEVEL FROM THE GROUND. ADD 1.5% EXTRA OVER THE RATE FOR EACH ADDITIONAL FLOOR OR 4M. BEYOND INITIIAL 8M. OR PART THEREOF. For structural members of specified sections weighing less than 22.5 Kg./m | 60.000 | SQM |
| 4 | ORDINARY CEMENT CONCRETE (MIX 1:2:4) WITH GRADED STONE CHIPS (20 MM NOMINAL SIZE) EXCLUDING SHUTTERING AND REINFORCEMENT,IF ANY, IN GROUND FLOOR AS PER RELEVANT IS CODES. Pakur Variety | 0.860 | CQM |
| 5 | M.S. STRUCTURAL WORKS IN COLUMNS, BEAMS ETC. WITH SIMPLE ROLLED STRUCTURAL MEMBERS (E.G. JOISTS, ANGLE, CHANNEL SECTIONS CONFORMING TO IS: 226, IS: 808 & SP (6)- 1964 CONNECTED TO ONE ANOTHER WITH BRACKET, GUSSETS, CLEATS AS PER DESIGN, DIRECTION OF ENGINEER-INCHARGE COMPLETE INCLUDING CUTTING TO REQUISITE SHAPE AND LENGTH, FABRICATION WITH NECESSARY BOLTING, METAL ARC WELDING CONFORMING TO IS: 816- 1969 & IS: 1995 USING ELECTRODES OF APPROVED MAKE AND BRAND CONFORMING TO IS:814- 2004, HAULAGE, HOISTING AND ERECTION ALL COMPLETE. THE RATE INCLUDES THE COST OF ROLLED STEEL SECTION, CONSUMABLES SUCH AS ELECTRODES, GAS AND HIRE CHARGE OF ALL TOOLS AND PLANTS AND LABOUR REQUIRED FOR THE WORK INCLUDING ALL INCIDENTAL CHAGES SUCH AS ELECTRICITY CHARGES, LABOUR INSURANCE CHARGES ETC. PAYMENT TO BE MADE ON THE BASIS OF CALCULATED WEIGHT OF STRUCTURAL MEMBERS ONLY IN FINISHED WORK AS PER IS SPECIFIED WEIGHT. PAYMENT FOR GUSSET, BRACKET, CLEAT, RIVETS, BOLTS AND NUTS MAY BE MAKE BY ADDING THE ACTUAL WEIGHT OF SUCH ITEMS WITH THE WEIGHT OF FINISHED STRUCTURAL MEMBERS OR 7% OF WEIGHT FOR FINISHED STRUCTURAL MEMBERS WEIGHING NOT LESS THAN 22.5 KG. / M. OR 15 % OF WEIGHT FOR FINISHED STRUCTAL MEMBERS WEIGHING LESS THAN 22.5 KG. / M. MAY BE INCREASED ALLOW FOR BRACKET, CLEAT, RIVET, BOLTS AND NUTS ETC. AND NO SEPERATE PAYMENT BEING MADE FOR THESE ITEMS, AS PER DIRECTION OF ENGINEER IN CHARGE. THE RATES ARE CONSIDERED FOR A HEIGHT OF ERECTION 8M. / 2ND FLOOR LEVEL FROM THE GROUND. ADD 1.5% EXTRA OVER THE RATE FOR EACH ADDITIONAL FLOOR OR 4M. BEYOND INITIIAL 8M. OR PART THEREOF. For structural members of specified sections weighing less than 22.5 Kg./m | 0.240 | MTS |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054