- Home
- >
- Tender
- >
- Kerala Tender
- >
- Department of NATIONAL INSTITUTE OF FASHION TECHNOLOGY
- >
NTID 46016737
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertAudio-visual Modernization Wor in Kannur - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Audio-visual Modernization Wor" in Kannur, India.
- Opening Date : Fri 14th August, 2026
- Closing Date : Wed 12th August, 2026
- ₹ 0.00
- NTID 46016737
Key Values: Document Cost: 0.00 | EMD: 57000.00 | Estimated Cost: 0.00
Tender Description
Audio-visual Modernization Work For Tiered Smart Classroom Solution On Bill Of Quantities (boq) Basis At Nift Dharmashala, Kannur Campus
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
57000.00 -
Document Cost
Refer Documents -
Estimated Cost
Refer Documents
BOQ Items Total Items : 14 | Total Qty : 1315
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Electrical Works | ||
| 2 | Supply, installation testing and commissioning of 120W Peak/60W Program/ 30W RMS power handling 2 way wall mount speaker with 1" dome tweeter and 3" low frequency driver, Frequency response -90 Hz-18kHz sensitivity @ 1W/1m @ 100V - 95 dB horizontal/vertical dispersion -100 degree following technical specification: a) Crossover- Frequency: 2.5 kHz, type : Passive built in b) Dricvers- HF: 1", LF : 3" c) Impedance: 8Ω d) Ingress Protection rating: IP 40 e) Sensitivity: (1W/1m): 85db f) Sound pressure(maxW/1m)-@100V: 95DB, @8Ω: 100dB g) Speaker type: 2 way h) RMS/AES power handling: 30W j) Peak power handling: 120W k) Program power handling: 60W l) Dispersion -Horizontal: 100degree, Vertical : 100degree m) Line transformer Tappings: 250Ω-100V/Not used-70V/20W, 500Ω-100V/20W-70V/10W, 1000Ω-100V/10W-70V/5W, 2000Ω-100V/5W-70V/2.5W | 4 | Each |
| 3 | Supply, installation testing and commissioning of 120W mixer amplifier with 6 x Microphone inputs, remote Mic, Chime & Mute contacts 5-zone output selector , low impedence and constant voltage output , priority inputs with phantom power , convection cooled , protection -DC short circuit , over heating over load , signal limitng with following technical specification: a) RMS/AES power handling: 120 W b) Frequency: Response(+ 3dB): 20Hz-20kHz c) Signal/Noise:> 90db d) THD +N (@1kHz): <0.5% e)Crosstalk(@ 1kHz): >70dB f) Technology Class: A/B g) Power Supply: Transformer h) Power range: 230~240VAC/50~60Hz j) Common mode rejection ratio: 70 dB k) Input: Balanced Microphone: 1-4 l) Type: 4 x Balanced Mic/Line(-6dB/-50dB) m) Connector: 2x XLR/jack combo & 2 x XLR n) Other: 4 x 15V DC phanbton & 2 x priority o) Balanced Microphone 5: Type : 1 x balanced Mic/Line(-6 dB/-50dB) p) connector: 6.3mm Jack q) Unbaalanced sterio: Type 1 x Sterio Unbalanced line(+14dB/-30dB) r) Connector : RCA s)Other : remote mic (priority mic and Tele -paging(Priority line), Priority mute contact t)Outputs- Connector : 2 pin Euro Terminal Block (Pitch - 5.08mm), 10pin Euro Terminal u)Voltage/Impedence: 100V/4Ω | 1 | Each |
| 4 | Supply, installation testing and commissioning of Cardiode condenser gooseneck microphone , frequency response 30-20000Hz integral 3-Pin XLRM type output connector. The item should be the following specifications: a) Fixed -charge back plate , permanently polarized condenser microphone element. b) Should have a cardiode polar pattern for focussed sound capture c) Should have a frequency response range of 30 Hz- 20000 Hz d) Should include a low frequency roll-off at 80 Hz with an 18dB/octave filter e) Should have an open circuit sensitivity of -39dB (11.2mV) re 1V at 1Pa f) Should have a nominal impedence of 250 Ohms for optimal signal transmision . g) Should support a maximum input sound level of 139 dB SPL at 1kHz with 1% THD. h) Should provide a dynamic range of 115dB at 1kHz at maximum SPL j) Should have a singnal-to-noise ratio of 70 db at 1 Pa k) Should operate with phantom power in the range of 11-52V DC, with a typical current draw of 2Ma l) Should have an integral 3-pin XLRM type connector for balanced audio output | 1 | Each |
| 5 | Supply, installation testing and commissioning of wireless Lapel microphone system with frequency response of 60Hz -16kHz with a 2 x 4 channel frequency plan for enhanced flexibility , microphone element of condenser cardiode operating range of 60m, typical | 1 | Each |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054