- Home
- >
- Tender
- >
- West Bengal Tender
- >
- Department of THE SHALIMAR WORKS (1980) LIMITED
- >
NTID 43231603
ProcXpert
Share Your purchase requirement, Our ProcXpert team will Connect you to right Supplier.
Inquiry Now
Need Expert Help with Tenders?
Whether it's GeM, eProcurement, or State Portals — our professionals assist you end-to-end with eligibility, documentation, and timely bid submission.
💬 Talk to Our Bidding ExpertAnnual Maintenance Contract o in Kakdwip - Complete Tender Details
Find eligibility criteria, important deadlines, bidding requirements, and download official documents for "Annual Maintenance Contract o" in Kakdwip, India.
THE SHALIMAR WORKS (1980) LIMITED
Kakdwip, West Bengal, India
NTID 43231603
- Opening Date : Mon 29th December, 2025
- Closing Date : Sun 28th December, 2025
- ₹ 4461972.00
- NTID 43231603
Key Values: Document Cost: 1500.00 | EMD: 90000.00 | Estimated Cost: 4461972.00
Tender Description
Annual Maintenance Contract (other Than Engines) Of Pwd Vessel Mv Sagarini (wb 1660) For 12 Months At Kakdwip (length 43.00 M, Breadth 11.00 M, Depth 2.80 M)
Documents
Get Complete Tender Details Now - Download the Document!
Download Now – Only ₹200-
Document-1
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
-
Document-2
721.3 kBOil_India_ExtraDoc...Oil_India_ExtraDocument-GCO0449P23.pdf
Costs
-
EMD
90000.00 -
Document Cost
1500.00 -
Estimated Cost
4461972.00
BOQ Items Total Items : 17 | Total Qty : 8689.79
| # | Item | Quantity | Units |
|---|---|---|---|
| 1 | Painting Scope of Work for Chipping, Scraping & Painting and renewal steel plates of the vessel: | ||
| 2 | i) Entire vessel interior and External surfaces to be thoroughly chipped, scraped & cleaned before painting. | 4323.830 | Square Metre |
| 3 | ii) Interior surface i.e. Engine Room, Rudder hold along with Engine Room floor plates, inside Girder, Beams, Bulkhead, Frames etc. to be painted : a) Inside bottom plate . 468.56 sqm. b) Inside side shell 193.01 sqm. c) Bulkhead (Transverse) . 257.6 sqm. d) Bulkhead (Longitudinal) 278.08 sqm. e) Inside transom . 27.13 sqm. f) Inside of Deck .. 473.00 sqm. g) Water tank 19.20 sqm. h) Fuel tank 20.80 sqm. i) Sewage tank 9.91 sqm. j) Checker plate . 220.00 sqm. k) Add stiffeners 30% of total Inside area 1857.29 sqm .557.19 sqm. Total area 2524.48 sqm. For each coat: 2524.48 x 1 coat= 2524.48 sqm. 1)Note:- i) Hull painting- inside: a) Zinc Chromate primer (red oxide colour)-1coat b) High gloss enamel (zed black colour)-1 coat ii) Hull painting engine room and steering compartment: a) Epoxy anti-corrosive primer pigmented with zinc phosphate-1 coat. b) Epoxy finish paint (zed black colour)-1 coat. 2) Note: Paints should be marine grade of reputed manufacturer like Berger paints or Shalimar paints and such paint shall have to be supplied by the bidder at his own cost. 3) Painting to be done once in 12 months. The time for painting shall be as communicated to the bidder by the Assistant Engineer, Kakdwip Mechanical Sub-Division. | 2524.480 | Square Metre |
| 4 | iii)External surface along with deck fittings i.e. Bollards, Air vents, Ramps, Ramp hoisting Post, Ladders, Manhole Doors etc. Outside & inside of Cabin, Toilet, Gallery, Store etc. to be painted: a) Outside bottom plate ..153.65 sqm. b) Outside side shell ..193.01 sqm. c) Outside Transom 27.13 sqm. d) Ramp .. 49.5 sqm. e) Deck outside 473.00 sqm. f) Ladder room 44.00 sqm. g) Store and bathroom 42.50 sqm. h) Kitchen . 30.96 sqm. i) Cabin Outside ..95.71 sqm. j) Bathroom and 04 nos. Cabin ..38.616 sqm. k) Deck house inside 357.08 sqm. l) Wheel house outside .35.92 sqm. m) Add stiffeners 30% of total Inside area 291.36 sqm ..87.40 sqm. Railing, pipe, piller, bollard, Fender, etc., lumpsump 200.00 sqm. Total area 1828.48 sqm. For each coat: 1828.48 x 1= 1828.48 sqm. 1)Note:- i) Hull painting Freeboard a) Zinc chromate primer (red oxide colour)-1 coat. b) High gloss enamel (Azure blue colour)-2 coats. ii) Hull Painting- Underwater (up to accessible area) a) Epoxy anti-corrosive primer pigmented with zinc phosphate- 1 coat b) Coal tar epoxy anti-corrosive protective coating- 1 coat c) Black paint based on special type bitumen medium- 2 coat d) Epoxy antifouling/vinyl antifouling paint- 1 coat iii) Deck: a) Zinc chromate primer (red oxide colour)-1 coat. b) High gloss enamel anti-skid (Bus Green Colour)-2 coats. iv) Superstructure: a) Zinc chromate primer (red oxide colour)-1 coat. b) High gloss enamel (white colour)-2 coats. 2) Note: Paints should be marine grade of reputed manufacturer like Berger paints or Shalimar paints. 3) Note: Painting has to be done once in 12 months except for the surface of the deck exposed to sunlight. The surface of the deck exposed to sunlight has to be painted once every 04 months. | 1828.480 | Square Metre |
| 5 | Cleaning of anchor chain (both port and starboard side and painting of anchor chain with black paint with Epoxy anti-corrosive primer pigmented with zinc phosphate 1 coat and Epoxy finish paint (zed black) 1 coat. Painting has to be done once every 06 months Note: Paints should be marine grade of reputed manufacturer like Berger paints or Shalimar paints. | 1.000 | Job |
You Are Free Trail User
PAY PER TENDER
Purchase Access To Download Selected Documents
₹ 200
Select this Plan SUBSCRIBE PLAN
For a one-time fee, you get unrestricted access to all documents and for a minimum of one year.
UNLIMITED
DOWNLOAD
Select this Plan
₹ 7000
Plan
Standard Plane
Day/Month
Standard Plane
Call Tender Expert
info@nationaltenders.In
Sales: +91 7383 93 4054