Supply of PAINT SYNTHETIC ENAMEL, EXTERIOR, FINISHING, BRUSHING COLOUR: PHIROZI BLUE [ISC - 176] CONFORMING TO IS: 8662/2004 [SECOND REVISION] WITH ADDITIONAL REQUIREMENT OFICF SPECIFICATION NO: ICF/MD/SPECN-045, ISSUESTATUS-02, REVISION-03 Dt. 14.06.2007 & RDSO Amendment no 1B as an additional requirement.

Western Railway

supply of stores for upgradation of security infrastructures in 2 mtn div sector - manufacture and supply of construction materials - , ordinary portland cement 43 grade in hdpe bags of 50 kg each, confirming to is 269-1976 of make : ambuja/birla/acc), coarse sand confirming to is383-1978, graded stone aggregate 20-40mm, structural steel rolled section angle iron 65 x 65 x 6mm fencing post 3.75m long conforming to is 2062-1984 including fabrication of 0.75 long top portion for swan neck at 30 degree to vertical including making six round holes of 15mm dia on vertical posts for fixing of nuts and bolts and three nos of 15mm dia holes for fixing strut and for nos notches on the swan neck and welding of two nos of 16mm ms rod each of 0.20 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coats of synthetic enamel paint for the exposed surface of angle above gl complete and two coat of bituminous paint to embedded portion of angle (0.60 m). weight of each picket shall be not less than 21.75 kg. make : tata / sail / jindal, ms flat of 40mm x 6mm, 2.4 m long with holes of 15mm dia, all as per drg including one coat of red oxide primer and two coats of synthetic enamel paint. make : tata / sail / jindal, mild steel round bars 10mm dia 3.15 metre long (including hook at both ends 0.09m long), made to shape as shown in drawing including two coat of red oxide primer complete. weight of each bar @ 0.617 kg/mtr. make - tata / sail / isi marked, galvanised steel chain link fence fabric of mesh size 100mm, 100 mm (+ / -) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.4m x 15m mesh wire. galvanised chain link shall be manufactured as per is-4826. make tata/sail/jindal, structural steel rolled section angle iron 65 x 65 x 6mm 2.90m long 16.82 kg per picket confirming to is 2065-1984 including fabrication for strut post bending at top portion includng making three nos holes of 15mm dia including 0.20 m 16 mm dia ms rod two pieces to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coats of synthetic enamel paint for exposed surfaces of angle above gl and two coats of bituminous paint on embedded portion of strut 0.55 mtr below gl. make : tata / sail / jindal, mild steel bolts with hexagonal head at one end and screwed on the other end, fitted with one nut and two washers. the bolt shall be 12mm dia and 50mm long. make : tata/sail/jindal., glavanised two strand steel barbed wire (line wire) of 2.24mm diameter of wire, barb at 75mm spacing. the barbs are point wire 2mm thick wire shall be isi marked confirming to is:278 of 1978, third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and other defects and shall be uniformly galvanized. the barbed wire shall be manuactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is4826 / 79 (first revision). make : tata/sail/ jindal., gi binding wire 1.20mm dia, supply & erection steel gate of size 4m x 2.4m including two x columns of ismb 250 x 125 mm, frame of angle iron 65 x 65 x 6mm, 02 x bracings of angle iron 50 x 50 x 6mm, 16mm dia square bars (guard bars) @ 100 mm centre to centre including 01 x wicket gate of size 1m x 1.6m alongiwith all fittings & fixtures & two coats of synthetic enamel paint over a coat of red oxide primer all as per drg & specifications given in rfp part

Military Engineer Services

Supply Of Paint Full Gloss Polyurethane Enamel Col

South Central Railway

Supply Of Paint Rfu Aluminium

Department of Defence Production

Supply Of Paint Rfu Aluminium Etc.

ORDNANCE FACTORY

Supply Of Set Of Writing Paints

Central Railway

Supply Of Paint Enamel Interior Finishing Middle Buff Isc No. 359 As Per Is:5/07 To Is:133, Part-1/2013 With Amndt. No. 1 Of 2015 Along With Additional Requirements Stipulated In Icf Specification No.icf/md/spec. 052, Issue Status 02, Rev. 1. Packed In 20 Ltrs. New & Sound Non Returnable M.s. Drum To Is:2552/89 With Amndt. 1 Of April 1999, Grade B-1

North Eastern Railway

Tender For Fixing Of 120 Nos. “y” Angle, Height 5’ Perpendicular And 2’ Each Arm Cutting Of Grooves For Fixing Of Barbed Wire With Belding Upon Existing Boundary Wall With Help Of Concrete & Cement And Installation Of Iron Gate (size 6’x10’) With One Coat Primer And Double Coat Panting At B-76 Bn, Crpf, Jkap Line, Jammu, (j&k)

CENTRAL RESERVE POLICE FORCE

fixed main contact etc - fixed main contact for kilburn at-15, 150 hp starter as per sample, fixed arcing contact for kilburn at-15, 150 hp starter as per sample, fixed contact base for kilburn at-15, 150 hp starter as per sample, set of arcing contact base for kilburn at-15, 150 hp starter comprising of 6 no. moving contact, overload coil mei make for at-15, 150 hp starter , complete rubbing contact assembly with terminal 150 hp kilburn make starter, m.s. clamp for at-15 150 hp kilburn starter, no volt coil with plunger assembly complete 150 hp starter kilburn make, oreva orfld-50 watt, 6500 k led flood light, ready mix black bitumen paint corrosion & heat resistance for general purpose 20 ltrs packing berger make, ready mix indigo blue bitumen paint corrosion & heat resistance for general purpose 5 ltrs packing berger make

Haryana Government

Supply of 18 TO 20 MM THICK JET APPROVED COLOR GRANITE SLAB WITH ARALDITE OR ANY OTHER EQUIVALENT ADHESIVE FOR FIXING IT. (MAKE: KAJARAIA, SOMANY OR ASIAN)

Western Railway